Polaris RANGER 150 EFI 2020 Owner's Manual page 96

MAINTENANCE
6. If hub nut was removed, install a new cotter pin after the hub nut has been
tightened. If the holes do not line up, turn the hub nut until the cotter pin
can be installed.
LIGHTS
DAYTIME RUNNING LIGHT REPLACEMENT
To remove the headlight, do the following:
1. Disconnect the headlight to harness connection
2. Remove the three fasteners
3. Remove the headlight from the inside of the front bumper.
94
w
retaining the headlight.
q
.
r