Safety Precautions; General; Hazardous Materials - Beijer Electronics X2 control 4-B2 Installation Manual

1. Safety Precautions

Both the installer and users of the HMI panel must read and understand this manual.

1.1. General

• Read the safety precautions carefully.
• Check the delivery for transportation damage. If damage is found, notify the supplier as soon as
possible.
• Do not use the HMI panel in an environment with high explosive hazards.
• The supplier is not responsible for modified, altered, or reconstructed equipment.
• Use only parts and accessories manufactured according to specifications of the supplier.
• Read the installation and operating instructions carefully before installing, using or repairing the
HMI panel.
• Never allow fluids, metal filings or wiring debris to enter any openings in the HMI panel. This may
cause fire or electrical shock.
• Only qualified personnel may operate the HMI panel.
• Storing the HMI panel where the temperature is lower or higher than recommended in this manual
can cause the LCD display liquid to congeal and become isotropic.
• The LCD display liquid contains a powerful irritant. In case of skin contact, wash immediately with
plenty of water. In case of eye contact, hold the eye open, flush with plenty of water and get
medical attention.
• The figures in this manual serve an illustrative purpose. Because of the many variables associated
with any particular installation, the supplier cannot assume responsibility for actual use based on
the figures.
• The supplier neither guarantees that the HMI panel is suitable for your particular application, nor
assumes responsibility for your product design, installation or operation.
• It is recommended to turn on and shut down the HMI panel at least once before installing any
components or cards, or before connecting the HMI panel to external devices, for example serial
devices.
• For Marine panels only:
• The HMI panel must be installed and operated as described in this document to meet this
certification.
• Observe precautions for handling electrostatic discharge sensitive devices.

1.2. Hazardous Materials

Part description
零件描述
PCB and electronic components
PCB 和电子元件
O: Indicates that the concentration of the hazardous substance in all homogeneous materials in the
parts is below the relevant threshold of the GB/T 26572-2011 standard.
O: 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572-2011 规定的限 量要求以下。
Beijer Electronics, MAEN213
Toxic and hazardous materials or elements
有毒和有害的材料或元素
Pb Hg Cd
X O O
5
Safety Precautions
Cr6+ PBB PBDE
O O O
2023-09