Hisense PureFlat RB22A2FSE User's Operation Manual page 9

7. Change screw hole covers and screw on
middle cover plate from left to right (as
shown in figure below).
8. Put out the Middle Hinge-left (14,
provided in the plastic accessory bag),
then screw it with the screws (11) and the 2
screws (13) from right side.
11
14
13
9. Install the screw hole cover-right 11
(provided in the plastic accessory bag) to
the right-top corner of cabinet. Remove
screw hole cover-left 12 from the left-top
corner of cabinet with the thin-blade
screwdriver and Keep the screw hole
cover-left and upper hinge-right for future
reference.
12
11
12
13
11
10. Carefully slot the upper door onto the
middle hinge pin and hold in position. Move
the upper door to an appropriate position,
adjust the upper hinge-left (provided in the
plastic accessory bag) and upper door, then
fit the hinge pin into the hinge hole at the top
of the upper door to secure it in place. Then fix
the upper hinge part with screws (Please
carefully hold the upper door by hand when
installing).
11. Assemble the upper hinge cover-left to
match the hinge. Install the door racks to
original position. Keep the upper hinge cover-
right with the appliance for future reference.
Disassembling the freezer Door
There are two doors in freezer compartment,
and it provide with an upper drawer with a
tray and also a lower drawer with a tray.
You can follow below same steps to
disassemble the drawers, trays and doors.
1. Pull out the freezer door and the upper
drawer(1) to the final position.
9