Hisense PureFlat RB22A2FSE User's Operation Manual page 7

1
2
3
1
2
1
2
When you reverse the door, please move the
handle 3, the screws 2 and the handle supports
1 to the right side. Move the screw hole covers
5 to the left side.
Reversing the door
The side at which the door opens can
be changed, from the right side (as
supplied) to the left side if required.
WARNING!
When reversing the door, the
appliance must not be
connected to the Power, Ensure
that the plug is removed from
the power socket.
1
2
4
1
2
5
3
5
2
NOTE
If required, you may lay the
refrigerator on its back in order
to gain access to the base,
you should rest it on soft foam
packaging or similar material
to avoid damaging the
backboard of the refrigerator.
To reverse the door, the following steps
generally recommended.
1. Take out the screw hole covers on the doors,
install the handle supports 1. Place the handle 3
and 4 on the doors by fitting the handle over
the handle supports 1, then fasten the screws 2
with 5/32" Allen wrench (provided in plastic
bag).
1. Stand the refrigerator upright. Open the door
to take out all door racks (to avoid damage)
and then close the door.
CAUTION!
Please slightly squeeze the
door rack from two sides
toward center and inside of
door rack, and then move it
upward when taking out the
upper rack and lower rack.
7