Hisense PureFlat RB22A2FSE User's Operation Manual page 8

2. With the door closed, unscrew 1 and remove
upper hinge cover-right 2 from the right-top
corner of cabinet. Remove the reed switch 4
and the humidity sensor unit 5 from the cabinet
and upper hinge cover-right 2, Install them on
the upper hinge cover-left (provided in the
plastic accessory bag). Unscrew the three
screws 3 which are used for fixing the upper
hinge-right (see the picture below).
3. Remove the upper hinge-right (please hold
upper door by hand when installing.
4. Remove the upper door from the middle
hinge by carefully lifting the door straight up.
Then place the upper door on a smooth surface
with its panel upwards.
1
2
3
5. Unscrew the two screws 6, then take out the
right door stopper for fridge door 7 and the
right stopper block for fridge door 8, Install the
replacement left door stopper 9 and left
stopper block 10 (provided in the plastic
accessory bag) to the left side with screws 6.
Keep 7 and 8 with the appliance for future
reference.
4
5
6. Open the freezer door, use the Allen wrench
(provided in the plastic accessory bag) to
unscrew the screws (11) and the 2 screws (13)
used to fix the middle hinge-right (12) and
remove middle hinge -right (12). Keep the
middle hinge -right (12) for future reference.
9
10
6
7
8
6
8