Installing Your New Appliance - Hisense PureFlat RB22A2FSE User's Operation Manual

Installing Your New Appliance

Before using the appliance for the first time,
you should be informed of the following tips.
WARNING
For proper installation, this refrigerator
must be placed on a level surface of
hard material that is the same height
as the rest of the flooring. This surface
should be strong enough to support a
fully loaded refrigerator.
The rollers, which are not casters,
should be only used for forward or
backward movement. Moving the
refrigerator sideways may damage
your floor and the rollers.
Ventilation of appliance
In order to improve efficiency of the
cooling system and save energy, it is
necessary to maintain good ventilation
around the appliance for the dissipation
of heat. For this reason, sufficient clear
space should be available around the
refrigerator.
Suggestion:
The following figure shows the
minimum installation size of the
appliance, which is different from the
electricity consumption test conditions.
Too small of a distance from adjacent
items may result in lowered freezing
capability and increased electricity
consumption charges. It is advisable
for there to be at least 2" (50mm) of
clearance from the back of the fridge
to the wall, at least 1/2" (12.5mm) of
clearance from its top, at least
1/2" (12.5mm) from its side to the wall
and a clear space in front to allow the
doors to open 130°.
2"
1/2"
Relevant information (inch)
W1
W D
20.8 28.7
31.3
W
Note:
This appliance performs well with
ambient temperature between 55°F
(12.8°C) to 110°F (43.3°C). The appliance
may not work properly if left at a
temperature above or below the
indicated range.
Stand your appliance in a dry place to
avoid high moisture.
Keep the appliance out of direct sunlight,
rain or frost. Stand the appliance away
from heat sources such as stoves, fires or
heaters.
1/2"
D1 D2 D3
61.4
34.2
53.1
W1
5