Table of Contents
Advertisement
APPLIANCE INTERIOR
EQUIPMENT
SHELF
BOTTLE RACK
• The rack can take a maximum load of nine 0.75-litre bottles or 13 kilograms of
total weight.
• Cans may also be placed on the bottle rack (lengthwise or crosswise).
• Empty shelves can be distributed
in the refrigerator interior without
having to remove the shelf from the
refrigerator.
To move the shelf to a diff erent
height, lift it at the front, hold it at
the back, pull forward a little and
move it higher or lower.
To remove the shelf from the
refrigerator, fi rst lift it at the front
part, hold it at the back part, and pull
it out from the appliance.
• The bottle rack is protected against
being inadvertently pulled out. It can
only be pulled out when it is empty.
To pull it out, lift it slightly at the
front and pull it towards you. Place
the bottle rack so that the length of
the bottles does not prevent proper
closing of the door.
15
Advertisement
Table of Contents
