Table of Contents
Advertisement
Appliance interior equipment
Shelf
1
2
Wire bottle rack*
Elastic bottle mat*
CrispZone – fruit and
vegetable bin with
humidity control
If the function is not deactivated manually, it will be deactivated
automatically after approximately two days.
(* Equipment depends on the model)
• For easier access to food and clarity, the shelves can be partly
pulled out.
• The shelves may be adjusted tu suit your preferences using
the guides in the refrigerator interior. To remove a shelf from
the refrigerator, pull it out tot he point when it is stopped by the
guide. Then, lift it slightly at the front part and pull it all the way
out.
Store perishables at the back of the shelf where the
temperature is the lowest.
• Some models also feature a wire bottle holder. The bottle holder is
protected against being inadvertently pulled out It can only be
pulled out when it is empty. To pull it out, lift is slightly at the back
and pull it towards you. Place the bottle holder so that the length of
the bottles does not prevent proper closing of the door. The holder
can take a maximum load of 9 0.75-liter bottles or 13 kilograms of
total weight – see label on the right side in the appliance interior.
• Cans may also be placed on the bottle rack (lengthwise or
crosswise).
• Some models feature an elastic mat on which bottles or cans
can be placed.
• The mat can also be used as a trivet for hot pans.
• The bin at the bottom of the refrigerator is intended for storing
fruit and vegetables. It provides humidity and prevents the
food from drying out.
• Store the food in suitable packaging to prevent them from
emitting or taking on odours.
The bin has integrated humidity regulator which allows setting
the humidity according to the amount of food stored.
13
Advertisement
Table of Contents
