Table of Contents
Advertisement
To change the equalizer display
Each time you keep pressing DISPLAY for
a few seconds, the equalizer display
changes to show one of the four displays
below.
If the sound does not come in for about a
minute, the spectrum analyzer display
turns to a picture. The display is restored
when the sound comes in.
Spectrum analyzer 1
os
Seo
ee
4%
Spectrum analyzer 2
SaaS
ee
eee
Adjusting the Audio
Emphasis
This feature lets you arrange the audio
emphasis by raising and lowering the level
of specific frequency ranges. Use the
buttons on the unit to do this operation.
SYSTEM
POWER 3ON
SURROUND
1 Press the desired equalizer setting
button.
2 Press
one of 4, >, & or ¥ (CURSOR
CONTROL).
The graphic equalizer curve and
18
Chapter 5: Sound Adjustment
fequency range appears in the display,
and the level vaiue flashes.
flashing
3 Press > or < to select the frequency
range you want to change.
flashing
4 Press A or ¥ to raise or lower the level
of the frequency range.
flashing
5 Repeat steps 3 and 4 to adjust other
frequency ranges.
To create the atmosphere of a movie
theater or concert hall
Press SURROUND so that the SURI)
indicator lights up.
[aS
a aR a
Ll
Making Your Personal
Audio Emphasis File
(personal file)
You can create a personal file of audio
patterns and store them in the memory of
the player. Later, call up an audio pattern
to play a favourite tape, CD, or radio
programme. Create up to five audio files.
SYSTEM
POWER 3ON
1,5
ee
.o CHF
cae)
=TSE
1 Press the desired equalizer setting
button.
2 Press SURROUND to activate or
deactivate the surround effect to suit
your taste.
3 Adjust the sound using CURSOR
CONTROL. (See "Adjusting the Audio
Emphasis" for details.)
4 Press EQ MEMORY.
"MEMORY" appears and a file number
flashes in the display.
flashing
5 Press a file number button that you
decide on.
"MEMORY"
disappears.
The adjusted equalizer curve and the
surround effect settings are stored at the
file number you selected.
To call up the personal file
Press P.FILE so that the indicator of P.FILE
lights up and then, press the desired file
number button, or press P.FILE on the
remote repeatedly.
To hear the effect of the adjustment
Press the selected button repeatedly.
You can compare the difference between
the adjusted sound (the indicator is lit) and
the sound with no equalizer-effect (the
indicator is not lit).
Advertisement
Table of Contents
