Download Print this page

Operating Elements And Connections; Safety Notes - Monacor STA-200D Instruction Manual

Digital stereo pa amplifier
Hide thumbs Also See for STA-200D:

Advertisement

Digital Stereo PA Amplifier
These instructions are intended for users without
any specific technical knowledge. Please read
these instructions carefully prior to operating the
unit and keep them for later reference.
All operating elements and connections
described can be found on the fold-out page 3.
1
Operating Elements
and Connections
1 Input PLAYER (3.5mm jack, stereo) with
adjustable sensitivity
2
Control GAIN for the sensitivity of the input
PLAYER
3
Input selector switches INPUT SELECT
4 Volume control LEFT for the left channel
5 LED indicators
ON
- amplifier switched on
PROTECT
- activation of protective circuit
OVERHEAT - overheating of amplifier
CLIP
- overload of amplifier
6 Volume control RIGHT for the right channel
7 POWER switch
8 Mains jack for connection to a socket
(230 V/50 Hz) via the mains cable provided
9 Support for the mains fuse
Always replace a blown fuse by one of the
same type.
10 Inputs 1 -4 (RCA jacks)
11 Terminals for the speakers
12 Speaker jacks (Speakon® compatible)
Note: Connect 42 speakers either to the
terminals or to the speaker jacks. 82 speak-
ers may be operated at the terminals and at
the speaker jacks at the same time.
WARNING
A
The unit uses dangerous mains
voltage. Leave servicing to skilled
personnel only and do not insert
anything into the air vents. In-
expert handling may result in
electric shock.
2 Safety Notes
This unit corresponds to all relevant directives of
the EU and is therefore marked with
C E.
• The unit is suitable for indoor use only. Protect
it against dripping water and splash water,
high air humidity and heat (admissible ambient
temperature range: 0-40 °C).
• Do not place any vessel filled with liquid on
the unit, e. g. a drinking glass.
• The heat generated inside the unit must be
dissipated by air circulation; never cover the
air vents of the housing.
• Do not operate the unit or immediately discon-
nect the mains plug from the socket
1. if the unit or the mains cable is visibly dam-
aged,
2. i f a defect might have occurred after the
unit was dropped or suffered a similar
accident,
3. if malfunctions occur.
In any case the unit must be repaired by skilled
personnel.
• Never pull the mains cable to disconnect the
mains plug from the socket, always seize the
plug.
• For cleaning only use a dry, soft cloth; never
use water or chemicals.
• No guarantee claims for the unit and no liabil-
ity for any resulting personal damage or mate-
rial damage will be accepted if the unit is used
for other purposes than originally intended, if
it is not correctly connected or operated, or if
it is not repaired in an expert way.
8
If the unit is to be put out of operation
f57
definitively, take it to a local recycling
/.a
olant for a disposal which is not harmful
- to the environment.

Advertisement

loading

This manual is also suitable for:

25.5070