Table of Contents
Advertisement
TROUBLESHOOTING
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
PROBLEM
If Stand Mixer warms up
during use
If the Flat Beater hits the
Bowl
If the Speed Control
Lever does not move
smoothly or easily
If your Stand Mixer should
fail to operate, please
check the following
If the problem cannot be
corrected
ELECTRICAL EQUIPMENT WASTE DISPOSAL
DISPOSAL OF PACKING MATERIAL
The packing material is recyclable and is marked with the recycle symbol
of the packing must therefore be disposed of responsibly and in full compliance with local
authority regulations governing waste disposal.
WARNING
Electrical Shock Hazard
Under heavy loads with extended mixing time periods, you
may not be able to comfortably touch the top of the unit. This is
normal.
Stop the Stand Mixer. See the "Product Assembly" section and
adjust the Beater to Bowl Clearance.
To move the Speed Control Lever with ease, lift slightly up as
you move it across the settings in either direction.
Is the Stand Mixer plugged in?
Is the fuse in the circuit to the Stand Mixer in working order? If
you have a circuit breaker box, be sure the circuit is closed.
Turn off (0) the Stand Mixer for 10-15 seconds, then turn it
back on. If the Stand Mixer still does not start, allow it to cool
for 30 minutes before turning it back on.
See the "Terms of KitchenAid Guarantee ("Guarantee")"
section. Do not return the Stand Mixer to the retailer; retailers
do not provide service.
SOLUTION
. The various parts
15
Advertisement
Table of Contents
