Table of Contents
Advertisement
TROUBLESHOOTING GUIDE
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
PROBLEM
If Stand Mixer warms up
during use
If Stand Mixer emits a
pungent odour
If the Flat Beater hits the
Bowl
If your Stand Mixer should
fail to operate, please
check the following
If your Stand Mixer should
fail to operate, please
check the following
If your Stand Mixer should
fail to operate, please
check the following
If the problem cannot be
corrected
ELECTRICAL EQUIPMENT WASTE DISPOSAL
DISPOSAL OF PACKING MATERIAL
The packing material is recyclable and is marked with the recycle symbol
of the packing must therefore be disposed of responsibly and in full compliance with local
authority regulations governing waste disposal.
WARNING
Electrical Shock Hazard
Heavy loads should not exceed Speed 2. Under heavy loads
with extended mixing time periods, you may not be able to
comfortably touch the top of the unit. This is normal.
This is common with electric motors, especially when new.
Stop the Stand Mixer. See the "Beater to Bowl Clearance"
section and adjust the beater to bowl clearance.
Is the Stand Mixer plugged in?
Is the fuse in the circuit to the Stand Mixer in working order? If
you have a circuit breaker box, be sure the circuit is closed.
Turn off the Stand Mixer for 10-15 seconds, then turn it back on.
If the Stand Mixer still does not start, allow it to cool for
30 minutes before turning it back on.
See the "Terms of KitchenAid Guarantee ("Guarantee")"
section. Do not return the Stand Mixer to the retailer; retailers
do not provide service.
SOLUTION
. The various parts
19
Advertisement
Table of Contents
