Preparation For Wall Mounting The Kdl-40S2400 - Sony BRAVIA KDL-32S2400 Operating Instructions Manual

Other Information
Preparation for Wall Mounting the KDL-40S2400
This TV can be installed on a wall by using a wall-mount bracket (sold
separately). Before mounting the TV on a wall, the Table-Top Stand must be
removed fl:om tile TV.
SonyWalI-Mount
Bracket Models
SU-WL51 and
SU-PW2
(KDL-40S2400)
Follow tile simple steps below to remove tile Table-Top Stand:
1 Disconnect all the cables from tile TV.
2
Start removing the screws from the ones on top. (See illustration below)
Do not remove any other screws from the TV.
3 When screws are removed, lift the TV out. Make sure that you carry out
this task with two people. Do not attempt to lilt the TV by your self.
For bracket installation, refer to the instruction guide provided by the Wall-
Mount Bracket model for your TV. Sufficient expertise is required in
installing this TV. especially to determine the strength of the wall for
withstanding the TV's weight. For product proteetion and safety reasons,
Sony strongly recommends that you use the Wall-Mount Bracket model
designed for your TV and the wall-mounting of your TV should be
performed by Sony dealers or licensed contractors.
%
44