Installation
1. Remove the screws on the case and turn the antenna counterclockwise by
about 45 degrees.
2. Put on the antenna bracket.
3. Turn the antenna to the proper position.
4. Tighten the 3 screws in the antenna package to the antenna bracket.
①
③
- Please refer to PPM DC1_100 Installation Manual.
https://mydeltasolar.deltaww.com/?p=product_manual
Screw
locations
Figure 3-20: Install antenna bracket
ATTENTION
42
②
④
* Screw torque: M4 / 0.98 N • m
> Data Collector > PPM DC1_100