Daikin CTXM15A2V1B User Reference Manual page 40

6 | Operation
To connect using SSID and KEY number
To reset the connection setting to the factory default
User reference guide
40
4 Press the WPS button on your communication device (e.g. router) within
approximately 1 minute. Refer to the manual of your communication device.
Result: The Daikin eye colour alternates between blue and partly green.
INFORMATION
If the connection with your router is not possible, try procedure
SSID and KEY number" [
5 Press to exit the menu.
Result: The display will return to the default screen.
1 On home screen menu, hold
operating.
Result: The SP menu appears. is blinking.
2 Change to the SP menu by pressing
(5 sec.)
3 Press to confirm the selection.
Result: is blinking. The Daikin eye colour alternates between red and partly
green.
4 Open the ONECTA application on your smart device and follow the steps on
the screen.
Result: If the connection was successful, the Daikin eye colour alternates
between blue and partly green.
5 Press to exit the menu.
Result: The display will return to the default screen.
Reset the connection setting to the factory default in case you want to:
▪ disconnect the wireless LAN and the communication device (e.g. router) or smart
device,
▪ repeat the setting if the connection was unsuccessful.
1 On home screen menu, hold
operating.
Result: The SP menu appears. is blinking.
2 Change to the SP menu by pressing
(5 sec.)
3 Hold for at least 2 seconds to confirm the selection.
Result: is blinking. The Daikin eye colour alternates between red and partly
green. The setting is reset to the factory default.
4 40].
for at least 5 seconds while the unit is not
twice or
2×
for at least 5 seconds while the unit is not
twice or
2×
"To connect using
repeatedly.
repeatedly.
CTXM-A, FTXM-A
Daikin room air conditioner
4P518786-12K – 2023.06