Racelogic VBOX Quick Start Manual page 8

Startup
When the VBOX Speed Sensor is powered up, it will
display the RACELOGIC logo along with hardware
variant and the serial number of the unit. Next, it will
change to display the firmware version of the unit.
When the unit has initialised and any warnings have
been cleared, the number of satellites will be displayed.
Press the Down arrow to open the status screen where
you can view information about Speed, Satellite count,
RTK Status and Wheel Speed.
Press the Up arrow to return to the main screen.
Note: RTK and wheel speed is not supported on the
VBOX 25 Hz Speed Sensor (v2).
Settings Menu
You can access the menu by pressing the OK button. Use the Up and Down arrows to navigate through the menu
and press the OK button to enter a submenu.
https://en.racelogic.support//Product_Info/Sensors/Single_and_Dual_Antenna_Speed_Sensors/
VBOX_25_Hz_Speed_Sensor_(v2)/VBOX_25_Hz_Speed_Sensor_(v2)_-_Quick_Start_Guide
8