Advertisement
NOTE:
When assembling the filter cap to the filter rotor, be sure
that the ribs are lined up with the grooves in the rotor
before installing the snap ring.
7. Remove the drain plug; take out the filter screen.
8. Wash the screen in clean solvent and then install it in the
original location.
12, FUEL FILTER
1. Turn the fuel valve to the "S" position.
2. Loosen the filter cap; take out the cap, O-ring and filter
screen from the valve in this order.
3. Clean the screen and cap in solvent. Replace the screen
and cap.
4. Turn the fuel valve to the "ON" position, making sure
that fuel is not leaking past the gasketed surface.
20
Fig. 2-24
@ Oil filtercap
© Rib
@ Oil filter rotor
@ Groove
Fig. 2-25
® Filter screen
@® Filter spring
{
Fig. 2—26
@ Fuel valve
Fig. 2-27
@ Filter screen
© Filter cap
@ O-ring
Advertisement
