Toyota VENZA 2022 Quick Reference Manual page 43

CHANGING PRE-COLLISION ALERT TIMING
(1) Press " " or "
Display (MID).
(2) Press " " or "
" ." The setting screen is displayed.
(3) Press " " or "
to change the desired setting. Each time it is pressed, the PCS alert timing
changes as shown above.
(4) Press " " to go back to the menu.
Note: PCS is enabled each time the vehicle is turned on. The system can be
disabled/enabled and the alert timing of the system can be changed. (Alert
timing only, brake operation remains the same.)
DISABLING PRE-COLLISION SYSTEM (PCS)
(1) Press " " or "
Display (MID).
(2) Press " " or "
turn PCS on or off.
Note: The system is enabled each time the vehicle is turned on.
Refer to the Toyota Owner's Manual for additional information on PCS w/PD
operation, settings adjustments, limitations, and precautions before attempting to
use it.
Far
" switches and select "
" switches and select "
" switches and select "Sensitivity" and then press "
" switches and select "
" switches and select "
41
Middle
Near
(default)
" from the Multi-Information
PCS" and then press and hold
" from the Multi-Information
PCS" and then press "
"
" to