Specifications - Tesla PC502WDW User Manual

SPECIFICATIONS

Model
PC502WDW ~230 V / 50 Hz
ASSEMBLY
1. Be sure to keep the distance between the heater and floor, wall and so on at least 30cm as picture (1).
2. Use drill dimension paper to drill top two holes(Φ8) on the wall and put the expansion screws in the holes
as picture (2).
3. The hook racks are pre-assembled on the back of the heater, hang the top two hook racks on the screws
as picture (3). Mark the two bottom hook racks' position on the wall and take away the heater, then drill
bottom two holes (Φ8) on the wall and put expansion screw's plastic cover in the holes as picture (3).
4. Hang the heater on the wall and put the expansion screws in the bottom two holes as picture (4).
1
For Stand
1 – Fit the foot onto the bottom of the body.
2 – Fasten the foot with 4 screws.
Voltage Power (W)
2000W
2
Length Width
87.0 cm 8.0cm
Height N.W.
43cm 5.6 kg
3
G.W.
6.6 kg
4
5