Axis Q180 LE Series User Manual page 26

AXIS Q180X-LE Bullet Camera Series
The web interface
Max gain: Select the suitable max gain. If you increase the max gain, it improves the visible level of detail in dark images, but
also increases the noise level. More noise can also result in increased use of bandwidth and storage. If you set the max gain
to a high value, images can differ a lot if the light conditions are very different from day to night. Max gain works with max
shutter to improve the image.
Motion-adaptive exposure
Blur-noise trade-off: Use the slider to adjust the priority between motion blur and noise. If you want to prioritize low bandwidth
and have less noise at the expense of details in moving objects, move the slider towards Low noise. If you want to prioritize the
preservation of details in moving objects at the expense of noise and bandwidth, move the slider towards Low motion blur.
Note
You can change the exposure either by adjusting the exposure time or by adjusting the gain. If you increase the exposure
time, it results in more motion blur, and if you increase the gain, it results in more noise. If you adjust the Blur-noise
trade-off towards Low noise, the automatic exposure will prioritize longer exposure times over increasing gain, and the
opposite if you adjust the trade-off towards Low motion blur. Both the gain and exposure time will eventually reach
their maximum values in low-light conditions, regardless of the priority set.
Lock aperture
adjust the aperture size. You can, for example, lock the aperture for scenes with permanent light conditions.
Aperture : Use the slider to adjust the aperture size, that is, how much light passes through the lens. To allow more light
to enter the sensor and thereby produce a brighter image in low-light conditions, move the slider towards Open. An open aperture
also reduces the depth of field, which means that objects close to or far from the camera can appear unfocused. To allow more of
the image to be in focus, move the slider towards Closed.
Exposure level: Use the slider to adjust the image exposure.
Defog : Turn on to detect the effects of foggy weather and automatically remove them for a clearer image.
Note
We recommend you not to turn on Defog in scenes with low contrast, large light level variations, or when the autofocus is
slightly off. This can affect the image quality, for example, by increasing the contrast. Furthermore, too much light can
negatively impact the image quality when defog is active.
Optics
Temperature compensation: Turn on if you want the focus position to be corrected based on the temperature in the optics.
IR compensation
Calibrate zoom and focus: Click to reset the optics and the zoom and focus settings to the factory default position. You need to
do this if the optics have lost calibration during transport, or if the device has been exposed to extreme vibrations.
Stream
General
: Select to reduce motion blur in low-light conditions.
: Turn on to keep the aperture size set by the Aperture slider. Turn off to allow the camera to automatically
: Turn on if you want the focus position to be corrected when IR-cut filter is off and when there is IR light.
26