Input Audio Routing/Controls - Cobalt Digital Inc 9934-AUD-PRO-DSP Product Manual

Operating Instructions
Table 3-2 9934-AUD-PRO-DSP Function Menu List — continued

Input Audio Routing/Controls

Emb Ch 1 – 6
AES Ch 1-2
9934-AUDPRO-OM (V1.5)
9934-AUD-PRO-DSP Function Menu List and Descriptions
Input Audio
Crosspoint
Bus Ch 1
Bus Ch 2
Card 16-Ch Internal Bus
Bus Ch 3
Bus Ch 4
Channel Delay Controls)
Bus Ch 5
Bus Ch 6
Bus Ch 7
Bus Ch 8
Bus Ch 9
Bus Ch 10
•
Silence
•
or Mute
•
Bus Ch 16
9934-AUD-PRO-DSP PRODUCT MANUAL
Provides audio routing, gain, per-channel/bulk audio
delay controls, and audio meters. These controls route
selected audio sources onto the card 16-channel
internal bus (which is used for all audio processing).
All audio inputs are transferred through the card
via the 16-channel Internal Bus (Bus Ch 1 thru
Bus Ch 16).
The example above shows various Source
selections that direct Emb Ch 1 thru Ch 6 and
AES Ch 1 and Ch 2 onto the card internal bus
(unused bus channels can be set to Silence or
(Gain, Mute, Bulk and
Mute).
Each bus channel provides Gain, Mute, and
Invert controls.
The source-to-destination correlation shown
here is only an example; any of the sources
described on the following pages can route to
any of the internal bus channels.
3-35