Input Audio Routing/Controls - Cobalt Digital Inc 9902-2UDX-DI Product Manual

3
Table 3-2 9902-2UDX-DI Function Menu List — continued

Input Audio Routing/Controls

Note:
Input Audio Routing/Controls tab has identical independent controls for both Path 1 and Path 2 using the Path 1 /
Path 2 sub-tabs. Therefore, only the Path 1 controls are shown here. Set controls for other path using the respective
sub-tab.
• • •
Path 1
Emb Ch 1 – 6
Path 1
Emb Ch 1-2
3-20
Input Audio
Crosspoint
Bus Ch 1
Bus Ch 2
Bus Ch 3
Bus Ch 4
Channel Delay Controls)
Bus Ch 5
Bus Ch 6
Bus Ch 7
Bus Ch 8
Bus Ch 9
Bus Ch 10
•
Silence
•
or Mute
•
Bus Ch 16
9902-2UDX-DI PRODUCT MANUAL
9902-2UDX-DI Function Menu List and Descriptions
Provides audio routing, gain, per-channel/bulk audio
delay controls, and audio meters. These controls route
selected audio sources onto the card 16-channel
internal bus (which is used for all audio processing).
All audio inputs are transferred through the card
via each path's 16-channel Internal Bus
(Bus Ch 1 thru Bus Ch 16).
The example above shows various Source
Path 1 Card 16-Ch
selections that direct Emb Ch 1 thru Ch 6 and
Internal Bus
Emb Ch 1 and Ch 2 duped onto the card
(Gain, Mute, Bulk and
internal bus (unused bus channels can be set to
Silence or Mute).
Each bus channel provides Gain, Mute, and
Invert controls.
The source-to-destination correlation shown
here is only an example; any of the sources
described on the following pages can route to
any of the internal bus channels.
9902-2UDXDI-OM (V1.0)