Checking 9934-Aud-Pro-Dsp Card Information - Cobalt Digital Inc 9934-AUD-PRO-DSP Product Manual

3

Checking 9934-AUD-PRO-DSP Card Information

The Tree View shows the cards seen by DashBoard™.
In this example, Network Controller Card is hosting a
9934-AUD-PRO-DSP card in slot 6.
Status Display
This displays shows the status and format of the signals being
received by the 9934-AUD-PRO-DSP, as well as card status
3-8
The operating status and software version the 9934-AUD-PRO-DSP card can
be checked using DashBoard™ or the card edge control user interface. Figure
3-5 shows and describes the 9934-AUD-PRO-DSP card information screen
using DashBoard™ and accessing card information using the card edge
control user interface.
Note: Proper operating status in DashBoard™ is denoted by green icons for the sta-
tus indicators shown in Figure 3-5. Yellow or red icons respectively indicate
an alert or failure condition. Refer to Troubleshooting (p. 3-75) for corrective
action.
Card Info Display
This displays (alternately
selected in the Card Info
pane) shows the the card
hardware and software
version info, as well as a
Cobalt Manufacturing
Part Number (MPN) for
the currently installed
rear module.
Figure 3-5 9934-AUD-PRO-DSP Card Info/Status Utility
9934-AUD-PRO-DSP PRODUCT MANUAL
Checking 9934-AUD-PRO-DSP Card Information
9934-AUDPRO-OM (V1.5)