solarcentre BERKELEY SC2347 User Manual

BERKELEY
SOLAR WALL LIGHT
W E
S
Ensure your solar
panel is South facing
or as near as possible
Thank you for choosing the Berkeley Solar Wall Light. Please read these instructions carefully before
Important notes
Always take care when installing your light. If you are at all unsure, please contact your retailer or a professional trades person for
advice.

Installation

Remove all packaging and put to one side. Please carefully consider where you wish to install your light before making alterations
to your property. It's particularly important that the solar panel receives as much sunlight as possible. Ensure that it is not
obstructed by buildings, fences, trees, sheds, etc. or the shadows that these create. If the solar panel is installed in a poor
location, it may not perform to the best of its ability.
To maximise the battery capacity, the light should be charged in direct sunlight for a full day, where possible, before being used for
the �rst time. Failure to do so can shorten the battery life or performance of the light.
The light will turn ON/OFF automatically when left in the on position. Please note it is completely normal for the light to come on
at di�erent times as it depends on how fast it charges in the location..
Step 1:
Remove the bracket from the
lamp body and mark two holes
using the bracket as a guide
Clean your solar
panel from time
to time
using your light.
Step 2:
Using your guide, drill
into the wall and
secure the wall plugs
into the wall
USER GUIDE
Do NOT place your
solar panel in shaded
areas.
Step 3:
Fix the bracket onto
the wall using the
screws provided
Do NOT charge
behind glass
Step 4:
Hang the lamp body on
the bracket and secure
into place