Advertisement
Available languages
Available languages
• mini 30
Use this programme to wash your lightly soiled cotton clothes
in a short time.
• Bavlna s Předpírkou (Prewash-Cottons)
Prefer this programme only for heavily soiled cotton clothes.
C
InformatIons
Not using this programme with prewash will save energy, water,
detergent and time.
4.5 special programmes
For specific applications, select any of the following
programmes.
• máchání (rinse)
Use this programme when you want to rinse or starch
separately.
• odstřeďování + Vypouštění (spin + Drain)
Use this programme to apply an additional spin cycle for your
laundry or to drain the water in the machine.
C
InformatIons
If you wish to drain the water only without spinning your laundry,
select the Spin+Pump programme and press "Start / Pause"
button. Machine will switch to spin step once it completes the
program step. Press "Start / Pause" button to stop the machine as
soon as you see the drum rotating. And cancel this programme by
turning Programme Selection knob to any other position.
Indicative values for Synthetics programmes (EN)
Synthetics 60
Synthetics 40
* You can see the washing time of the programme you have selected on the display of the machine. It is normal that small
differences may occur between the time shown on the display and the real washing time.
** Remaining moisture content values may differ according to the selected spin speed.
11 / EN
2.5
55
1.02
2.5
54
0.50
4.6 spin speed selection
Whenever a new programme is selected, the recommended
spin speed of the selected program is displayed on the spin
speed indicator.
To decrease the spin speed, press the spin speed adjustment
button. Spin speed decreases gradually.
Then, depending on the model of the product, "Rinse Hold"
and "No Spin" options appear on the spin speed led indicator.
4.7 rinse Hold
If you are not going to unload your clothes immediately after
the programme completes, you may use rinse hold function to
keep your laundry in the final rinsing water in order to prevent
them from getting wrinkled when there is no water in the
machine.
In rinse hold step, the machine will be in pause mode and
"start/pause" led will be blinking. In rinse hold step, if you
want to drain the water without spinning your laundry,
press the "start/pause" button. Programme will resume and
complete after draining the water.
If you want to spin the laundry held in water, select the
spin speed and press "start/pause button. The programme
resumes, water is drained, laundry is spun and the
programme is completed.
Remaining Moisture
Content (%) **
≤ 1000 rpm
01:53
45
01:45
45
Remaining Moisture
Content (%) **
> 1000 rpm
40
40
Washing Machine / User's Manual
Advertisement
