Switching The Appliance On; Setting The Temperature; Alarm Function - Siemens GS58NAW30F Instructions For Use Manual

Switching
the appliance on
Fig. "
Switch on the appliance with the On/Off
button 1.
A warning signal sounds.
The temperature display 4 flashes
and the alarm button 5 is lit.
Press the alarm button 5. The warning
signal switches off.
When the freezer compartment has
reached the set temperature, the
temperature display 4 is lit.
Operating tips
After the appliance has been switched
■
on, it may take several hours until
the set temperature has been
reached. Do not put any food
in the appliance beforehand.
The fully automatic NoFrost system
■
ensures that the freezer compartment
remains free of ice. Defrosting is not
required.
The sides of the housing are
■
sometimes heated slightly. This
prevents condensation in the area
of the door seal.
If the freezer compartment door
■
cannot be immediately re-opened after
it has been closed, wait until
the resulting low pressure has
equalised.
Setting
the temperature
Fig. "
Freezer compartment
The temperature can be set from -16 °C
to -26 °C.
Keep pressing temperature setting
button 3 until the required freezer
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on display 4.
We recommend a factory setting of -
18 °C in the freezer compartment.

Alarm function

In the following cases an alarm may be
actuated.
Door alarm
The door alarm (continuous sound)
switches on if the appliance door is open
for longer than one minute. Close
the door to switch off the warning signal.
Thaw alarm
When the alarm button 5 is pressed,
the temperature display indicates for five
seconds the warmest temperature
reached in the freezer compartment.
Then this value is deleted.
The display 4 indicates the set freezer
compartment temperature without
flashing.
Henceforth the "warmest temperature"
will be redefined and saved.
en
27