Table of Contents
Advertisement
Tip: If a power failure or malfunction
occurs, the ice pack can be used to
slow down the thawing process for
the stored frozen food.
Ice cube tray
Use the ice cube tray to make ice
cubes.
Making ice cubes
Fill the ice cube tray with water up
1.
to ¾ and place in the freezer com-
partment.
If the ice cube tray is stuck to the
freezer compartment, loosen with a
blunt implement only (e.g. spoon
handle).
To loosen the ice cubes, twist the
2.
ice cube tray slightly or hold briefly
under flowing water.
Basic operation
Basic operation
You can find out everything you need
to know about operating your appli-
ance here.
Switching on the appliance
Press .
1.
a The appliance begins to cool.
a A warning signal sounds and
lights up because the freezer com-
partment is still too warm.
Switch off the warning signal with
2.
.
goes out as soon as the set
a
temperature has been reached.
Set the required temperature.
3.
→ Page 17
Operating tips
¡ Once you have switched on the
appliance, the set temperature is
only reached after several hours.
Do not put in any food in the appli-
ance until the temperature is
reached.
¡ The front panels of the housing are
temporarily heated slightly. This
prevents condensation in the area
of the door seal.
¡ When you close the door of the
freezer compartment, a vacuum
may be created and you may not
be able to open the freezer door
again immediately. Wait a moment
until the vacuum is offset.
Switching off the appliance
Press .
▶
a The appliance stops cooling.
Setting the temperature
After you have switched on the appli-
ance, you can set the temperature.
Setting the freezer compartment
temperature
Press / repeatedly until the tem-
▶
perature display shows the re-
quired temperature.
The recommended temperature in
the freezer compartment is
−18 °C.
Basic operation en
17
Advertisement
Table of Contents
