Before First Usage - Dualit 89230 Instruction Manual

SETTING UP YOUR AIR FRYER
CONT'D
7 8
MAXIMUM
COOKING OIL 30ML
SOLID FAT 30g
Caution: The Air Fryer is To insert the Crisper Plate,
not a deep fat fryer and must pick it up using the Ring Pull
never be used with more and identify the Crisper Plate
than 30ml of any type of Orientation Arrows that
cooking oil or 30g solid lard/ are on the Crisper Plate.
fat. Risk of fire. Your Air Orientate the Crisper Tray
Fryer will work with no oil so that the Crisper Plate
or fat. Orientation Arrows point
away from the Crisper Tray
Handle. Lower side opposite
the Crisper Plate Orientation
Arrows into the Crisper Tray.
6 11
10
If you are not using this
Before use, follow the
appliance for the first time,
Cleaning & maintenance
skip steps on 'Before First
instructions on page 25.
Usage' on page 13 and move
on to 'Preheating Your Air
Fryer' on page 14.
9
Then lower side with arrows
into the Crisper Tray. Never
position with Ring Pull facing
down or arrows pointing
towards handle. Risk of
damage to non-stick
coating/ Crisper Plate getting
stuck in Crisper Tray.
12
BEFORE FIRST USE
ENSURE YOU HAVE READ 'IMPORTANT SAFETY PRECAUTIONS' ON PAGE 04
AND 'SETTING UP YOUR AIR FRYER' ON PAGE 11. TURN YOUR AIR FRYER
ON FOR THE FIRST TIME IN A WELL VENTILATED ROOM. A 'NEW' SMELL
MAY BE GIVEN OFF, THIS WILL DISSIPATE AFTER A FEW USES.
THE FOLLOWING STEPS ARE ONLY NECESSARY BEFORE FIRST USAGE
1 2
1
Plug your Air Fryer into the Press the Power/ Play/
mains. The appliance will Pause Button to illuminate
beep once and the Power/ the Main Display Menu.
Play/ Pause Button will
illuminate red, indicating
Standby Mode.
4 5
Once you have set the time When the cooking cycle
and temperature, press the is finished the appliance
Power/ Play/ Pause Button flashes 'Off' on the display,
to start the cooking cycle. beeps 5 times and enters
The Cooking Indicator will Standby Mode.
illuminate and flash.
3
Use the +/- Time Buttons
to set the time for 5
minutes. Use the +/-
Temp Buttons to set the
temperature to 200°C.
6
If you have finished using
the appliance, unplug it from
the mains. Risk of fire.
Allow the appliance to cool
for one hour before moving,
cleaning or storing.
Risk of injury.
13