Selecting Voices - KETRON AUDYA 4 Manual

Selecting voices

Selecting voices
You can find three rows of eight buttons each
in the VOICE section on the front panel. The
first two rows allow the selection of the voice
families, ordered by a common use (see a full
list of the voices at the end of this manual).
B
The third row contains the PROGRAM button
and other voices selection buttons. Moreover,
there are also the DOUBLE, HARMONY buttons.
Selecting a basic voice
▀
1. Select one voice family by pressing one of the 16
buttons on the first two rows in the VOICE section.
For example, press the "PIANO" family button.
The first page showing the first ten available
voices of the PIANO family will appear.
2. By pressing one of the F1-F5 or F6-F10 buttons,
select one of the ten voices shown on the display,
corresponding to the name of the voice.
For example, by pressing the F4 button, you will
select the voice named "HONKY_TONK"
1).
3. Press the CURSOR Ó Á to select the various
VOICE pages with further ten voices each
2). Note that you can access more than 2 pages
for each voice family.
NOTE
By turning the wheel clockwise/
counter-clockwise you can scroll the
pages, just like the CURSOR Ó Á .
Also, you can scroll the pages by
pressing repeatedly the same VOICE
family button (e.g. PIANO, EL.PIANO
and so on.)
14
KETRON • AUDYA
B
(Figure
(Figure
F
F
Figure 1
Figure 2