Table of Contents
Advertisement
CONTENTS
SAFETY PRECAUTIONS ...................................... 2
FEATURES AND FUNCTIONS ............................. 3
NAME OF PARTS ................................................. 4
PREPARATION ..................................................... 6
OPERATION .......................................................... 7
TIMER OPERATION ............................................. 9
SLEEP TIMER OPERATION ............................... 10
MANUAL AUTO OPERATION ............................. 10
SAFETY PRECAUTIONS
Before using the appliance, read these "PRECAUTIONS" thoroughly and operate in the correct way.
l
The instructions in this section all relate to safety; be sure to maintain safe operating conditions.
l
"DANGER", "WARNING" and "CAUTION" have the following meanings in these instructions:
l
This mark indicates procedures which, if improperly performed, are most likely toresult in
DANGER
the death of or serious injury to the user or service personnel.
This mark indicates procedures which, if improperly performed, might lead to the death or
WARNING
serious injury of the user or service personnel.
This mark indicates procedures which, if improperly performed, might possibly result in
CAUTION
personal harm to the user, or damage to property.
l
DANGER
l
l
l
l
l
l
l
l
l
l
CAUTION
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
En-2
Do not attempt to install this air conditioner by yourself.
This unit contains no user-serviceable parts. Always consult authorized service per-
sonnel for repairs.
When moving, consult authorized service personnel for disconnection and installa-
tion of the air conditioner.
Do not become excessively chilled by staying for many hours in the direct cooling airflow.
Do not insert fingers or objects into the outlet port or intake grilles.
Do not start and stop air conditioner operation by disconnecting the power supply
cable and so on.
Take care not to damage the power supply cable.
In the event of a malfunction (burning smell, etc.), immediately stop operation, turn
off the electrical breaker, and consult authorized service personnel.
If the power supply cable of this appliance is damaged, it should only be replaced by the
authorized service personnel, since special purpose tools and specified cable are required.
In the event of the refrigerant leakage, be sure to keep it away from fire or any flam-
mables. (consult an authorized service personnel)
Provide occasional ventilation during use.
Do not direct air flow at fireplaces or heating apparatus.
Do not climb on, or place objects on, the air conditioner.
Do not hang objects from the indoor unit.
Do not set flower vases or water containers on top of air conditioners.
Do not expose the air conditioner directly to water.
Do not operate the air conditioner with wet hands.
Do not pull power supply cable.
Turn off power source when not using the unit for extended periods.
Always turn off the electrical breaker whenever cleaning the air conditioner or
changing the air filter.
Connection valves become hot during Heating; handle with care.
When restarting after a long period of disuse in the winter, turn the power switch on
at least 12 hours before starting the unit.
Check the condition of the installation stand for damage.
Do not place animals or plants in the direct path of the air flow.
Do not drink the water drained from the air conditioner.
Do not use in applications involving the storage of foods, plants or animals, preci-
sion equipment, or art works.
Do not apply any heavy pressure to radiator fins.
Operate only with air filters installed.
Do not block or cover the intake grille and outlet port.
Ensure that any electronic equipment is at least 1 m away from either the indoor or
outdoor units.
Avoid installing the air conditioner near a fireplace or other heating apparatus.
When installing the indoor and outdoor units, take precautions to prevent access by infants.
Do not use inflammable gases near the air conditioner.
SWING OPERATION .......................................... 12
ECONOMY OPERATION .................................... 12
10 °C HEAT OPERATION ................................... 13
SELECTING THE REMOTE CONTROLLER
SIGNAL CODE .................................................... 13
CLEANING AND CARE ....................................... 14
TROUBLESHOOTING ........................................ 15
OPERATING TIPS ............................................... 16
Advertisement
Table of Contents
