Table of Contents
Advertisement
U S I N G YO U R S M A R T H U M I D I F I E R
Note: Using the VeSync app allows you to
control your smart humidifier remotely and
access additional functions and features
(see page 16).
1.
Plug in the humidifier. The humidifier will
light up, then turn off.
2.
Tap
to turn your humidifier on. The
humidifier will start misting.
Note: If there is no water in the tank,
will flash 10 times, and the humidifier will
turn off. Fill the water tank (see
Started, page 9).
3.
Tap
repeatedly to cycle through mist
settings: Low, Medium, and High.
4.
Rotate the nozzles to adjust the direction
of the mist.
Note:
•
Direct the nozzles away from any
furniture, walls, or other objects to
prevent them from getting wet.
•
Do not
the nozzles.
5.
Optionally, use the controls or the VeSync
app to turn on warm mist, activate
Sleep Mode, and more (see
Display
, page 8).
6.
When your room has reached your
preferred humidity level, turn the
humidifier to a lower setting, or turn it off.
A comfortable humidity level is between
40% and 60%.
Note: You can also set the humidifier
to automatically stop misting when the
room reaches a specific humidity level
(see
Humidity
7.
Tap
to turn your humidifier off.
12
Getting
[Figure 3.1]
inhale the mist directly from
Controls &
Level, page 13).
Figure 3.1
Advertisement
Table of Contents
