Preferred List; Access Settings - Philips 639 User Manual

mode is selected. Select the network you want to
,
register with and press

Preferred list

Allows you to build a network list in
order of preference. Once defined, the
Preferred list
phone will try to register on a network,
according to your preferences.

Access settings

This menu allows you to create several
data profiles: when using WAP or when
Access settings
sending a multimedia message (MMS),
the selected profile will be used to connect to the
GSM or GPRS network.
All options described below are operator and/or
subscription dependent. With some operators, you
may receive a SMS which contains access parameters
that will be stored automatically. Please contact your
network operator for detailed information on this
subject.
Change name
Allows you to enter or change the name
of the selected profile. Press
Change name
the name of your choice and press
to confirm.
38
to confirm.
,
, enter
,
Some pre-configured profiles might be locked,
preventing re-programming and renaming.
Show
Allows you to visualise all parameters of
the selected profile (ISP number, APN,
Show
etc.), either
GSM settings
Allows you to enter or change the GSM
settings and gives you access to the
GSM settings
following items:
Login and Password allow you to enter the login and
password needed. In both cases, enter the information
,
and press to confirm.
Phone Number allows you to enter the phone number
needed to establish a connection. Select
,
and press
numbers
select:
- to enter an ISDN ISP number, OR
ISDN No.
- to enter an analogic number.
Analogic No.
In both cases, enter the «+» sign followed by the
number provided by your operator and press
Contact your operator to know what type of number
you should select.
allows you to enter an inactivity time
Inactivity time
period after which the phone automatically
or GPRS.
GSM
+ -
, then press or
,
Settings
Phone
to
.