Time And Date; Clock Display; Set Date; Date Format - Philips 639 User Manual

disconnects (if a connection was in progress) and
returns to idle screen.
Select and press
Inactivity time
(in seconds) of over 30 s. and press
GPRS settings
This allows you to change the GPRS
settings, Login,
GPRS settings
time (the same fields and the same
instructions as for GSM settings, please refer to the
previous section).
allows you to enter the address of the external
APN
data network you want to connect to, a text string (or
IP address, e.g., wap.operatorname.fr) used to
establish the connection. Select
then enter the appropriate address and press
Error messages during connections are mainly due to
incorrect parameters: you should contact your
operator before first use, in order to have the
appropriate settings. With some operators, the access
parameters can be set remotely. Please check with your
operator.
Settings
,
, then enter a value
,
.
and
Password Inactivity
,
and press ,
APN
,
.

Time and date

This menu allows you to set the time and date, time
zone, daylight savings, and change the clock display
mode.

Clock display

Allows you to select Analogue,
time formats when shown in idle
Tiny
Clock display
mode, by pressing
cases, press

Set date

Allows you to set the date by pressing
the appropriate numeric keys (you can
Set date
also set the date by moving
-
). Press

Date format

Allows you to select one of the two
available date formats, either
Date format
or Thai. Press

Time zone

The time zone and daylight savings are to be set first.
You should then double-check date and time if
previously set. To know which time zone you are in,
Digital
+ -
or . In all
,
to confirm.
+
,
to confirm.
Western
,
to confirm.
or
or
39