Make A Second Call; Answer A Second Call - Philips 639 User Manual

Hide thumbs Also See for 639:
Table of Contents

Advertisement

character as a wait character. When you dial a number
containing a wait character, your phone dials the first
part (the phone number) and then waits for the call to
be connected before sending the rest of the digits as
DTMF tones. Any subsequent pause character is an
ordinary pause that generates a delay of 2.5 seconds.
For example: access your answering machine
To hear all messages (e.g. code 3) on your answering
machine (password 8421) at phone number
12345678, you could call:
The phone dials 12345678 and waits for the call to be
connected. When connected, the phone transmits
8421 (the password), pauses 2.5 seconds, and then
sends the last digit. If you find that 2.5 seconds is not
long enough for your needs, you can enter several
pause characters one after the other to increase the
pause time.

Make a second call

You can make a second call during an active call or
during a call on hold. You can switch between the two
calls (the cost displayed on the screen depends on local
charge rate).
1.
While already on the phone, dial a number then
(
press
. The first call is put on hold and the
80
12345678w8421p3.
number is displayed at the bottom of the screen.
The second number is then dialled.
2.
To toggle between the two calls, press
select
calls. Each time that you toggle
Switch
from one call to another, the active call is placed
on hold and the call which was on hold is
activated.
3.
To hang up the active line, press
line is hung up and the call on hold remains as
such.
4.
To end the call on hold, use
)
it, then press
.
Notes:
The second number can be dialled either from the
keypad or from:
- the phonebook, by pressing
name to be called,
- the Call list, by pressing
number to be called.

Answer a second call

You are able to receive another call when already in
communication (if this feature is available with your
subscription). When you receive a second call the
,
then
)
. The active
to reach
Switch calls
-
, then selecting the
+
, then selecting the
Operator services

Advertisement

Table of Contents
loading

Table of Contents