X93;U3” Underfloor Heating Screed Dry-Out Failure - Daikin EHYHBH05AAV3 Service Manual

ESIE13-02A

“U3” Underfloor Heating Screed Dry-out Failure

5.3
U3
Remote controller
display
Method of An interruption during the underfloor heating screed dry-out program is detected.
malfunction
detection
Malfunction Screed dry-out program was interrupted incorrectly (ex. by accident by end user).
decision conditions
Supposed causes
Troubleshooting
Attention! U3 error can only be reset in installer level, to avoid that the installer is not informed that the dry-out
schedule was interrupted.
Another error, U3 only generated when other error is solved.
Operation OFF button pushed
Power failure
Check if dry-out schedule was interrupted.
If schedule was interrupted by mistake reset error and continue dry-out again.
If schedule was interrupted deliberately, reset U3 error and start operation (dry-out is responsibility
of the installer according to instructions of screed manufacturer)
Error Codes: System Malfunctions
143 Part 4 – Troubleshooting
4
3
4 4
5