Programming The Washing Time - Beko DFN39340X Instruction Manual

InnerClean
This programme is recommended
to be operated on each 1-2 months
for machine cleaning and necessary
hygiene. The programme should be
operated while the machine is empty.
In order to achieve an efficient result,
it is recommended to use together
with special machine cleaning agents.
A
Do not use Machine Cleaning
programme to clean dishes. As it
operates in high temperatures, it
is harmful for the dishes.
Changing Warning Sound Volume
Your machine is equipped with an
audio signal to inform warnings
audibly.
1. After turning on the machine,
press Time Delay and P+ keys
simultaneously. Continue to press
until the countdown 3, 2, 1 is
completed on the display.
2. Press P+ key to activate the S
position.
3. Select one of S1, S2 and S0 with
Time Delay key.
4. Turn off the machine with On/Off
button to save the changes.
Programming the washing
time
Time Delay
If an economical electricity tariff is
applied in your region, you can use
the Time Delay function to wash your
dishes during appropriate hours.
You can delay the start of the
selected program until 24 hours.
Time Delay cannot be set after the
programme starts.
1. Press the Time Delay function
key after selecting the washing
programme and other auxiliary
functions.
2. Once you press the Time Delay
key, Display Information Line
will show "0:30" and Time Delay
indicator will start flashing.
3. Set the desired time by pressing
the Time Delay key. Time will
increase with increments of 30
minutes up to 6 hours and after
that in 1 hour increments up to 24
hours every time you press the
key.
4. Press Start / Pause / Cancel key
to start countdown for the Time
Delay. Time Delay indicator and
Start / Pause indicator will light
continuously until the end of the
period. Time Delay is displayed
on the Display Information Line.
Selected programme will start as
soon as the countdown is over.
Changing the settings while Time
Delay function is enabled
While the Time Delay function is
activated, you cannot make changes
in the washing programme, auxiliary
functions or the duration of delay
time.
C
Programme and auxiliary
functions cannot be set/changed
after the programme has started.
To cancel the Time Delay function
1. Press and hold Start / Pause /
Cancel key for 3 seconds.
2. When the Start / Pause / Cancel
key is pressed and hold, "3", "2", "1"
appear on the Display Information
Line. Time Delay indicator will turn
off at the end of the cancellation
process and delaying process is
cancelled.
C
You can select and start a
new programme following
the cancellation of Time Delay
function.
36 EN