Table of Contents
Advertisement
Changing SelfDry Settings
1. Press the Delay and P/P+ key
simultaneously after turning on your
machine. Keep pressing until the
countdown on the screen displayed as
3, 2, 1 is completed.
2. Press P / P+ key, and move to the o:
position on the screen. "o: 0" position
indicates that the SelfDry feature is off
"o: 1" position indicates that it is on.
Select the desired position with the
delay key.
3. Turn off your machine with the On/Off
key to save the setting.
EverClean Filter
(depends on the model)
With this function, your micro filter will be
cleaned by a special system at the end of
washing cycle and it is made ready for use
for the next usage of the machine. This
cleaning process increases the cleaning
period of the micro filter from 2 weeks to
3 months and thus boosts the washing
performance. Employing this function in
every washing cycle is recommended in
order to get the most out of it.
Programming the washing time
Time Delay
If an economical electricity tariff is applied
in your region, you can use the Time
Delay function to wash your dishes during
appropriate hours.
You can delay the start of the selected
programme until 24 hours. Time Delay
cannot be set after the programme starts.
1. Press the Time Delay function key after
selecting the washing programme and
other auxiliary functions.
2. Once you press the Time Delay key,
Display Information Line will show
"0:30" and Time Delay indicator will
start flashing.
32/EN
3. Set the desired time by pressing the
Time Delay key. Time will increase with
increments of 30 minutes up to 6 hours
and after that in 1 hour increments up
to 24 hours every time you press the
key.
4. Press Start / Pause / Cancel key to
start countdown for the Time Delay.
Time Delay indicator and Start / Pause
indicator will light continuously until
the end of the period. Time Delay is
displayed on the Display Information
Line. Selected programme will start as
soon as the countdown is over.
Changing the settings while Time
Delay function is enabled
While the Time Delay function is activated,
you cannot make changes in the washing
programme, auxiliary functions or the
duration of delay time.
Programme and auxiliary functions
cannot be set/changed after the
programme has started.
To cancel the Time Delay function
1. Press and hold Start / Pause / Cancel
key for 3 seconds.
2. When the Start / Pause / Cancel key is
pressed and hold, "3", "2", "1" appear
on the Display Information Line. Time
Delay indicator will turn off at the end of
the cancellation process and delaying
process is cancelled.
You can select and start a new
programme following the cancellation
of Time Delay function.
Time Delay function can not be set
after the programme starts.
Starting the programme
To start your machine after selecting the
programme and auxiliary functions, press
Start / Pause / Cancel key.
Advertisement
Table of Contents
