Table of Contents

Advertisement

Quick Links

Dishwasher
User's Manual
DFN39533X
EN
Document Number :
18 7448 0100_AB_BEKO_C6_EN/ 25-06-19.(13:45)

Advertisement

Table of Contents
loading

Summary of Contents for Beko DFN39533X

  • Page 1 Dishwasher User’s Manual DFN39533X Document Number : 18 7448 0100_AB_BEKO_C6_EN/ 25-06-19.(13:45)
  • Page 2 Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
  • Page 3 Dishwasher User’s Manual DFN39533X Document Number : 18 7448 0100_AB_BEKO_C6_EN/ 25-06-19.(13:45)
  • Page 4 Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
  • Page 5: Table Of Contents

    CONTENTS 1 INSTRUCTIONS FOR SAFETY Lower basket multipurpose / height adjustable service rack ..... 23 AND ENVIRONMENT Lower basket bottle wire ....24 General safety ........4 Upper basket height adjustable rack 24 Intended use ..........4 Upper basket multipurpose service Children’s safety ........5 rack ............
  • Page 6: Instructions For Safety And Environment

    instructions for safety and environment This section contains safety Never touch the plug with • instructions that will help to get wet hands! Never unplug by protected from risk of personal pulling on the cable, always injury or property damage. Failure pull out by grabbing the plug.
  • Page 7: Children's Safety

    instructions for safety and environment Children’s safety This appliance is intended • to be used in household and Electrical products are • similar applications such as: dangerous for the children. - Staff kitchen areas in shops, Keep children away from the offices and other working product when it is in use.
  • Page 8: Compliance With Weee Directive And Disposing Of The Waste Product

    instructions for safety and environment Compliance with RoHS 1. Unplug the product before transporting it. Directive 2. Remove water drainage and The product you have purchased water supply connections. complies with EU RoHS Directive 3. Drain the remaining water in (2011/65/EU).
  • Page 9: Dishwasher Overview

    Dishwasher Overview 1. Upper basket 2. Upper impeller 3. Lower impeller 4. Silverware basket 5. Door 6. Rating Label 7. Control panel 8. Detergent dispenser 9. Lower basket 10. Filters 11. Salt reservoir lid 12. Upper basket rail 13. Upper cutlery basket (depends on model) 14.
  • Page 10: Fan Drying System

    Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220 V, 60 Hz (see rating label)
  • Page 11: Installation

    Installation Appropriate installation Refer to the nearest Authorised Service Agent for installation of your product. To location make the product ready for use, make sure Place the product on a solid and flat • that the electricity, tap water supply and floor that has sufficient load carrying water drainage systems are appropriate capacity! The product must be installed...
  • Page 12: Connection To The Drain

    Installation Permitted water temperature: up causes dirty washing. to 25°C Attach the water discharge hose to the The dishwasher may not be connected to drainpipe without bending it. Tightly fix the open warm water devices or flow-through water discharge hose to the drainpipe in water heaters.
  • Page 13: Aquasafe

    Installation Aquasafe+ The voltage and allowed fuse or • breaker protection are specified in the (depends on model) “Technical specifications” section. If the The Aquasafe+ system protects against current value of the fuse or breaker in water leaks that may occur at the hose inlet. the house is less than 16 Amps, have Water contact with the valve box of the a qualified electrician install a 16 Amp...
  • Page 14: Preparation Tips For Energy Saving

    Preparation Tips for energy saving Adjusting the water softening system Following information will help you use the product in an ecological and energy-efficient Cleaning, rinsing and drying performance of manner. your dishwasher will increase when water Wipe away any coarse food remnants on the softening system is adjusted properly.
  • Page 15 Preparation Use the test strip supplied with the product according to the steps given below to determine hardness level of your supply water. Remove the test Turn on the tap and Hold the test strip in Remove the test Wait for 1 minute. The test strip shows strip from the let the water run for...
  • Page 16: Adding Salt

    Preparation If your machine is equipped with “Automatic Water Hardness Detection System”, water hardness adjustment will be made by the service/user as standard during first installation. If you move your house, your machine will automatically perform water hardness level adjustment according to the 3.
  • Page 17: Detergent

    Preparation Push the latch to right to open the Since different salt brands detergent dispenser lid (A). in the market have different particle sizes and since the water hardness may vary, dissolution of the salt in water may take a couple of hours. Therefore, Salt Indicator remains on for a while after adding salt into the machine.
  • Page 18: Tablet Detergents

    Preparation The best washing performance in dishwashers is obtained by using detergent, rinse aid and water softening salt individually. Observe the instructions of the detergent manufacturer on the package when using tablet detergents. Contact the detergent manufacturer if your dishes are wet and/or if you notice Use powder or liquid/gel limescale spots particularly on...
  • Page 19: Rinse Aid

    Preparation Rinse aid The rinse aid used in dishwashers is a special combination that aims to increase drying efficiency and prevent water or lime stains on the washed items. For this reason, care must be paid 4. If there are stains on tableware items to have rinse aid in the rinse after washing, level must be increased aid reservoir and to use rinse...
  • Page 20: Placing The Dishes Into The Dishwasher

    Preparation Decorative prints of chinaware as well as aluminium and silver items may get discoloured or tarnished after washing in the dishwasher just as it happens in handwashing as well. Some delicate glass types and crystals may become dull in time. We strongly recommend you to check if the tableware you are going to purchase is suitable...
  • Page 21 Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Improper Loading Of Dishware Dishwasher / User’s Manual 19 / 45 EN...
  • Page 22: Cutlery Basket

    Preparation Cutlery basket Cutlery basket (depends on model) (depends on model) Cutlery basket is designed to wash your Cutlery basket is designed to wash your dishes such as knife, fork, spoon, etc. in an dishes such as knife, fork, spoon, etc. in an efficient manner.
  • Page 23: Collapsible Lower Basket Tines

    Preparation Collapsible lower basket Bringing the tines to the tines horizontal position by holding them from the tips may cause (depends on model) them to bend. Therefore, it will There are foldable tines (A) located at the be appropriate to bring the tines in the middle to horizontal or lower basket of the machine are designed vertical position by holding them...
  • Page 24: Tray Wash Supports

    Preparation SoftTouch Accessory (depends on model) The SoftTouch Accessory found in the lower basket of your machine enables a safe washing for your fragile glasses. Bringing the tines to the horizontal position by holding them from the tips may cause them to bend.
  • Page 25: Lower Basket Multipurpose / Height Adjustable Service Rack

    Preparation Lower basket multipurpose Make sure that the impeller does / height adjustable service not touch the dishes you placed rack on the racks. (depends on model) To close the racks: This accessory located at the lower basket Fold the rack (A). of your machine allows you to easily wash 2.
  • Page 26: Lower Basket Bottle Wire

    Preparation Lower basket bottle wire Upper basket multipurpose service rack (depends on model) The bottle wire is designed for easier (depends on model) washing of long pieces with wide mouths. This accessory located at the upper basket You may take out the bottle wire from the of your machine allows you to easily wash basket when not in use by pulling it out from pieces such as extra long ladles and bread...
  • Page 27: Adjusting The Height Of The Upper Basket

    Preparation Adjusting the height of the To lower the basket, while it is in the uppermost position; upper basket Hold the upper basket wires with both (depends on model) hands, slightly lift up the basket and The upper basket height adjustment simultaneously push and release the mechanism has been designed for you to latches shown in the figure (B).
  • Page 28: Collapsible Upper Basket Wires

    Preparation Collapsible upper basket Height setting with empty wires basket (depends on model) (depends on model) You can use collapsible wires when you need In this model, the height setting of the upper a larger space for your dishes in the upper basket may be changed using the wheels basket of your machine.
  • Page 29: Ceiling Cutlery Basket

    Preparation Ceiling cutlery basket (depends on model) Ceiling cutlery basket is designed to wash your cutlery items such as forks, spoons and etc. by placing them between the bars on the basket. When the central tray is in the lower position, you can load long/high items such as coffee cups, ladles, etc.
  • Page 30: Operating The Product

    Operating the product Display 5. Function keys 2. On/Off key Fast+ Function 3. Start/Pause/Cancel key SteamGloss Function 4. Time Delay key AquaIntense Function IonGuard function 6. Programme Selection keys 7. Programme indicator 12. End of Programme indicator 8. Salt ( ) indicator 13.
  • Page 31: Keys

    Operating the product Keys Programme selection On / Off key Press the On/Off button to turn on your It is used to turn on or off the machine. machine. Press On / Off Key to switch ON. A signal is 2.
  • Page 32 Operating the product /45 EN Dishwasher / User’s Manual...
  • Page 33: Auxiliary Functions

    Operating the product Auxiliary functions IonGuard function “IonGuard function” is enabled at regular Washing programmes of your dishwasher intervals and prevents the formation of bad are designed to obtain the best cleaning odours due to putrefaction. If this function effect, considering the type of the soil, is selected, it will be activated while the soiling degree and properties of the dishes product is turned off and the IonGuard...
  • Page 34: Programming The Washing Time

    Operating the product 3. Turn off the machine with On/Off key to Auto Tablet Feature save the changes. Auto Tablet is a feature which detects the use of combined tablet detergents Changing Warning Sound Volume automatically. Your machine is equipped with an audio signal to inform warnings audibly.
  • Page 35 Operating the product indicator will light continuously until Time Delay function can not be the end of the period. Time Delay is set after the programme starts. displayed on the Display Information Line. Selected programme will start as Starting the programme soon as the countdown is over.
  • Page 36: Cancelling The Programme

    Operating the product Pay attention not to open the If you turn your machine off by door of the machine when it is using On/Off key at the end of running. Stop the machine by the programme, the Child Lock pressing Start / Pause / Cancel will be deactivated automatically.
  • Page 37: End Of Programme

    Operating the product 3. Unplug the machine from the socket. No rinse aid dispensed in P:0 wash position. 1 dose of rinse aid is dispensed in P:1 For energy saving, the product position. is automatically turned off 2 doses of rinse aid are dispensed in P:2 following the completion of the position.
  • Page 38: Innerclean

    Operating the product InnerClean This programme is recommended to be operated on each 1-2 months for machine cleaning and necessary hygiene. The programme should be operated while the machine is empty. In order to achieve an efficient result, it is recommended to use together with special machine cleaning agents.
  • Page 39: Maintenance And Cleaning

    Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if it is Clean the filters at least once a week in order cleaned at regular intervals. for the machine operates efficiently. Check if Unplug the product and turn off food residues are left on the filters.
  • Page 40: Cleaning The Hose Filter

    Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose.
  • Page 41: Cleaning The Impellers

    Maintenance and cleaning Cleaning the impellers Upper impeller Clean the impellers at least once a week in Check if the holes on the upper impeller (1) order for the machine operates efficiently. are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left to Lower impeller remove the upper impeller.
  • Page 42: Troubleshooting

    Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •...
  • Page 43 Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed.
  • Page 44 Troubleshooting Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme. There is a different odour in the machine A new machine has a peculiar odour. It will fade out after a couple of washes. •...
  • Page 45 Troubleshooting Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing.
  • Page 46 Troubleshooting A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.

Table of Contents