Table of Contents
Advertisement
CABINET DISASSEMBLY INSTRUCTIONS
Screw Torque Specification
Ref.
Part
Part Name
No.
Number
SCREW P-TIGHT
L4 GBHP3080
(M3X8 BIND
HEAD+BLK)
SCREW S-TIGHT
L23 GBJS3060
(M3X6 BIND HEAD+)
S-TIGHT SCREW
L24 GBHS3060
(M3X6 BIND
HEAD+BLACK)
STAND SCREW KIT
(SCREW P-TIGHT
SSK1 1ESA34670
M4X14 BIND HEAD +
BLK)
* For reference
1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts and the CBA in order to gain access to
items to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
[2] Stand
[1] Rear Cover
Assembly
[4] Stand Holder
[5] Power Supply
CBA
[7] LCD Panel
Assembly
[8] Front Cabinet
[9] Function CBA
Unit
2. Disassembly Method
Step/
Fig.
Loc.
Part
No.
No.
[1]
Rear Cover D1 7(S-1), 5(S-2)
Stand
[2]
D1 3(S-3)
Assembly
D2
[3]
Speaker
CN3801
D5
Stand
[4]
D2 4(S-4)
Holder
Tightening
Torque
5.2±0.9lbf·in
(approx.
*
8.7±0.9lbf·in)
[3] Speaker
[6] Digital Main
CBA Unit
Removal
Note
---
---
---
1
4-1
Step/
Fig.
Loc.
Part
No.
No.
Power
D3
4(S-5), CN501,
[5]
Supply
D5
CN601, CN1001
CBA
4(S-6), CN3013,
Digital Main
D3
[6]
CN3006, CN3101,
CBA Unit
D5
Jack Holder
LCD Panel
[7]
D4 ----------------
Assembly
Front
[8]
D4 8(S-7)
Cabinet
Function
Sensor Lens, Shield
[9]
D4
CBA Unit
Plate, Control Plate
↓
↓
↓
(1)
(2)
(3)
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
H = Hex Screw, CN = Connector
e.g. 2(S-2) = two Screws of (S-2),
2(L-2) = two Locking Tabs of (L-2)
(5) Refer to the following "Reference Notes in the
Table."
Important precautions concerning the
LCD Panel Assembly:
When you disassemble/re-assemble the Front
Cabinet or Function CBA Unit
• Be careful not to break the hooks. If you pull with too
much force, the hooks may be damaged.
• Be careful not to scratch the display panel when
assembling.
• Be careful not to scratch the rear frame when
disassembling/re-assembling or when tightening the
screws.
• Make sure the Shield Plate is placed properly.
Removal
Note
---
---
---
2
2
↓
↓
(4)
(5)
PL13.36_DC
Advertisement
Table of Contents
