FUNAI LC320SLX Service Manual
  1. Manuals
  2. Brands
  3. FUNAI Manuals
  4. LCD TV
  5. LC320SLX
  6. Service manual

FUNAI LC320SLX Service Manual

Chassis fl9.1
Hide thumbs Also See for LC320SLX:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
LCD TV

SERVICE MANUAL

32"
32"
32"
32"
© 2009 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed,
downloaded or stored in any storage medium, in any form or for any purpose without the express prior written
consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto
is strictly prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content
herein without the obligation to notify any person or organization of such changes.
with the
design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way
without the express written consent of Funai. All other trademarks used herein remain the exclusive property of
their respective owners. Nothing contained in this manual should be construed as granting, by implication or
otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any
other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights
to the fullest extent of the law.
chassis FL9.1
Contents
LC320SLX
32MF339B/F7
LC320SSX
LC320EMX
SYLVANIA
MAGNAVOX
SYLVANIA Limited
EMERSON
A91F3UH/A91F0UH/A91F1UH/A91F4UH
090406

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LC320SLX and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for FUNAI LC320SLX

Summary of Contents for FUNAI LC320SLX

  • Page 1: Service Manual

    Funai Electric Co., Ltd and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners.

  • Page 2: Pixels

    IMPORTANT SAFETY NOTICE Proper service and repair is important to the safe, reliable operation of all Funai Equipment. The service procedures recommended by Funai and described in this service manual are effective methods of performing service operations. Some of these service special tools should be used when and as recommended.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS Specifications ................1-1 Important Safety Precautions .

  • Page 4: Specifications

    Vertical line < AUDIO > All items are measured across 8 Ω load at speaker output terminal with L.P.F. Description Condition Unit Nominal Limit [LC320SLX, [LC320SLX, LC320EMX] LC320EMX] 5.0/5.0 4.5/4.5 1. Audio Output 10% Distortion Lch/Rch (ATSC 0 dBfs) [32MF339B/F7,...

  • Page 5: Important Safety Precautions

    IMPORTANT SAFETY PRECAUTIONS Prior to shipment from the factory, our products are strictly inspected for recognized product safety and electrical codes of the countries in which they are to be sold. However, in order to maintain such compliance, it is equally important to implement the following precautions when a set is being serviced.

  • Page 6: Specifications

    3. Design Alteration Warning - Do not alter or add 7. Product Safety Notice - Some electrical and to the mechanical or electrical design of this TV mechanical parts have special safety-related receiver. Design alterations and additions, characteristics which are often not evident from including, but not limited to circuit modifications visual inspection, nor can the protection they give and the addition of items such as auxiliary audio...
  • Page 7 Precautions during Servicing A. Parts identified by the # symbol are critical for safety. Replace only with part number specified. B. In addition to safety, other parts and assemblies are specified for conformance with regulations applying to spurious radiation. These must also be replaced only with specified replacements.
  • Page 8 Safety Check after Servicing Examine the area surrounding the repaired location for damage or deterioration. Observe that screws, parts and wires have been returned to original positions. Afterwards, perform the following tests and confirm the specified values in order to verify compliance with safety standards. 1.

  • Page 9: Standard Notes For Servicing

    STANDARD NOTES FOR SERVICING Circuit Board Indications How to Remove / Install Flat Pack-IC 1. The output pin of the 3 pin Regulator ICs is 1. Removal indicated as shown. With Hot-Air Flat Pack-IC Desoldering Machine: Top View Bottom View 1.
  • Page 10 3. The flat pack-IC on the CBA is affixed with glue, so With Soldering Iron: be careful not to break or damage the foil of each 1. Using desoldering braid, remove the solder from pin or the solder lands under the IC when all pins of the flat pack-IC.
  • Page 11 With Iron Wire: 2. Installation 1. Using desoldering braid, remove the solder from 1. Using desoldering braid, remove the solder from all pins of the flat pack-IC. When you use solder the foil of each pin of the flat pack-IC on the CBA flux which is applied to all pins of the flat pack-IC, so you can install a replacement flat pack-IC more you can remove it easily.
  • Page 12 Instructions for Handling Semi- conductors Electrostatic breakdown of the semi-conductors may occur due to a potential difference caused by electrostatic charge during unpacking or repair work. 1. Ground for Human Body Be sure to wear a grounding band (1 MΩ) that is properly grounded to remove any static electricity that may be charged on the body.

  • Page 13: Cabinet Disassembly Instructions

    CABINET DISASSEMBLY INSTRUCTIONS [LC320SLX, 32MF339B/F7, LC320SSX] 1. Disassembly Flowchart Removal Step/ This flowchart indicates the disassembly steps for the Remove/*Unhook/ Loc. Part Fig. Unlock/Release/ cabinet parts, and the CBA in order to gain access to Note Unplug/Unclamp/ item(s) to be serviced. When reassembling, follow the Desolder steps in reverse order.
  • Page 14 (S-2) (S-4) [2] Rear Cabinet (S-4) (S-2) (S-3) (S-4) (S-2) (S-2) [1] Stand Assembly Fig. D1 (S-1) A91F3DC...
  • Page 15 [3] Inverter CBA (S-5) (S-5) (S-7) [4] Jack CBA (S-11) (S-6) (S-7) Shield Box (S-7) [5] Power Supply CBA (S-9) [7] Digital Main (S-10) CBA Unit (S-9) (S-8) [6] Jack Holder Fig. D2 A91F3DC...
  • Page 16 [14] Front Cabinet [13] LCD Module Assembly (S-12) Hook [9] Speaker [8] Speaker Holder (R) (S-15) [10] Junction [12] Function CBA (S-14) (S-12) Hook [11] IR Sensor CBA [9] Speaker (S-13) [8] Speaker Holder (L) Fig. D3 A91F3DC...

  • Page 17: Wiring Diagram

    TV Cable Wiring Diagram Inverter CBA Jack CN1050 Power Supply CBA CL701B CN1100 CN1001 CN201 CN1150 CL701A CN602 CN1900 CN1200 CN302 CN1003 AC CORD CN301 CN801 CN802 CN101 To LCD Module Assembly To Speaker Digital Main Junction CBA Unit CN101 CL102A CN3702 IR Sensor CBA...

  • Page 18: Cabinet Disassembly Instructions

    CABINET DISASSEMBLY INSTRUCTIONS [LC320EMX] 1. Disassembly Flowchart Removal Step/ This flowchart indicates the disassembly steps for the Remove/*Unhook/ Loc. Part Fig. Unlock/Release/ cabinet parts, and the CBA in order to gain access to Note Unplug/Unclamp/ item(s) to be serviced. When reassembling, follow the Desolder steps in reverse order.
  • Page 19 (S-2) (S-4) [2] Rear Cabinet (S-4) (S-2) (S-3) (S-4) (S-2) (S-2) [1] Stand Assembly (S-1) Fig. D1 A91F4DC...
  • Page 20 [3] Inverter CBA (S-5) (S-5) (S-7) [4] Jack CBA (S-11) (S-6) (S-7) Shield Box (S-7) [5] Power Supply CBA (S-9) [7] Digital Main (S-10) CBA Unit (S-9) (S-8) [6] Jack Holder Fig. D2 A91F4DC...
  • Page 21 [15] Front Cabinet [9] Speaker Holder(s) [R] (S-13) [11] Speaker (S-14) (S-13) [11] Speaker (S-14) [12] Junction [10] Speaker Holder(s) [L] (S-15) [13] IR Sensor CBA [14] Function CBA (S-12) [8] LCD Module Assembly Fig. D3 A91F4DC...
  • Page 22 TV Cable Wiring Diagram Inverter CBA Jack CN1050 Power Supply CBA CL701B CN1100 CN1001 CN201 CN1150 CL701A CN602 CN1900 CN1200 CN302 CN1003 AC CORD CN301 CN801 CN802 CN101 To LCD Module Assembly To Speaker Digital Main Junction CBA Unit CN101 CL102A CN3702 IR Sensor CBA...

  • Page 23: Electrical Adjustment Instructions

    How to make the Service remote Service mode: control unit: 1. Use the service remote control unit. [LC320SLX, LC320EMX] 2. Turn the power on. Cut “A” portion of the attached remote control unit as 3. Press the service button on the service remote shown in Fig.

  • Page 24: Vcom Adjustment

    1. Purity Check Mode 2. VCOM Adjustment This mode cycles through full-screen displays of red, Test Point Adj. Point green, blue, and white to check for non-active pixels. [CHANNEL UP/DOWN ] 1. Enter the Service mode. Screen buttons 2. Each time pressing [7] button on the service M.

  • Page 25: White Balance Adjustment

    The white balance adjustment should be 5. [CUTOFF] Press [1] button to select “COR” for Red Cutoff performed when replacing the LCD Panel adjustment. Press [3] button to select “COB” for or Digital CBA. Blue Cutoff adjustment. [DRIVE] 3. White Balance Adjustment Press [4] button to select “DR”...

  • Page 26: How To Initialize The Lcd Tv

    HOW TO INITIALIZE THE LCD TV The purpose of initialization is to place the set in a new out of box condition. The customer will be prompted to select a language and program channels after the set has been initialized. To put the program back at the factory-default, initialize the LCD TV using the following procedure.

  • Page 27: Firmware Renewal Mode

    FIRMWARE RENEWAL MODE Equipment Required The appearance shown in *1 is described as follows. Appearance State a. USB memory Downloading the firmware from b. Remote Control Unit Downloading... the USB memory. Writing the downloaded firmware Writing... Firmware Update Procedure in flash memory. Checking...

  • Page 28: Troubleshooting

    TROUBLESHOOTING [ Power Supply Section ] FLOW CHART NO.1 The power cannot be turned on. Is the fuse (F601) normal? See FLOW CHART No.2 <The fuse blows out.> Check if there is any leak or short-circuiting on the primary circuit component, and service it if defective. (C605, D601, D602, D603, D604, Q601, Q602, T601) Is the AL+33V line voltage normal?
  • Page 29 FLOW CHART NO.6 LCD+24.5V is not output. FLOW CHART NO.7 LCD+16V is not output. FLOW CHART NO.8 INV+16V is not output. FLOW CHART NO.9 P-ON+7V is not output. A91F3TR...
  • Page 30 FLOW CHART NO.10 P-ON+5V is not output. (LCD+16V is outputted normally.) Replace Q641 and Q643. FLOW CHART NO.11 P-ON+5V(TUNER+5V) is not output. (LCD+16V is outputted normally.) Replace Q641 and Q643(Q640). FLOW CHART NO.12 AL+13V(M+13V) is not output. Is approximately +13V voltage supplied to the cathode of D641 and D642? FLOW CHART NO.13 P-ON+3V is not output.
  • Page 31 FLOW CHART NO.14 P-ON+3.3V is not output. FLOW CHART NO.15 P-ON+9V is not output. (LCD+16V is outputted normally.) Replace Q642. FLOW CHART NO.16 AL+3.3V is not output. FLOW CHART NO.17 LCD-6.8V is not output. Replace Q211. A91F3TR...
  • Page 32 [ Video Signal Section ] FLOW CHART NO.1 [LC320SSX, 32MF339B/F7, LC320SSX] The key operation is not functioning. Re-install the switches (SW101A, SW103A~SW107A) correctly or replace the poor switch. Check the switches (SW101A, SW103A~SW107A) and their periphery, and service it if defective. Replace Digital Main CBA Unit.
  • Page 33 FLOW CHART NO.4 Picture does not appear normally.(Tuner input) FLOW CHART NO.5 Picture does not appear normally.(S-Video input) Pin(6): S-VIDEO-C Pin(8): S-VIDEO-Y FLOW CHART NO.6 Picture does not appear normally.(Y/Pb/Pr input) Pin(15): VIDEO-Y Pin(17): VIDEO-Pb Pin(19): VIDEO-Pr A91F3TR...
  • Page 34 [ Audio Signal Section ] FLOW CHART NO.1 Audio is not outputted normally.(Audio input) Check the line between Pin(2, 15) of IC771 and input terminal(JK753, JK754), and service it if defective. Pin(6) : AMP(L)-OUT Pin(8) : AMP(R)-OUT Pin(2) : AUDIO(L)-OUT Pin(4) : AUDIO(R)-OUT CN802: SP(L)
  • Page 35 FLOW CHART NO.2 Audio is not outputted normally.(Component Audio input) Check the line between Pin(4, 11) of IC771 and input terminal(JK741, JK742), and service it if defective. Pin(6) : AMP(L)-OUT Pin(8) : AMP(R)-OUT Pin(2) : AUDIO(L)-OUT Pin(4) : AUDIO(R)-OUT CN802: SP(L) Check SP801,SP802 and their periphery circuit, CN801: SP(R) and service it if defective.
  • Page 36 FLOW CHART NO.3 Audio is not outputted normally.(Tuner input) Check TU301 and their periphery circuit, and service it if defective. Pin(6) : AMP(L)-OUT Pin(8) : AMP(R)-OUT Pin(2) : AUDIO(L)-OUT Pin(4) : AUDIO(R)-OUT CN802: SP(L) Check SP801,SP802 and their periphery circuit, CN801: SP(R) and service it if defective.

  • Page 37: Block Diagrams

    BLOCK DIAGRAMS System Control Block Diagram A91F3BLS...
  • Page 38 Video Block Diagram A91F3BLV...
  • Page 39 Audio Block Diagram A91F3BLA...
  • Page 40 Digital Signal Process Block Diagram A91F3BLD...
  • Page 41 Inverter Block Diagram A91F3BLINV...
  • Page 42 Power Supply Block Diagram A91F3BLP...

  • Page 43: Schematic Diagrams / Cba And Test Points

    SCHEMATIC DIAGRAMS / CBA AND TEST POINTS Standard Notes WARNING Many electrical and mechanical parts in this chassis have special characteristics. These characteristics often pass unnoticed and the protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc.
  • Page 44 LIST OF CAUTION, NOTES, AND SYMBOLS USED IN THE SCHEMATIC DIAGRAMS ON THE FOLLOWING PAGES: 1. CAUTION: CAUTION: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE_A,_V FUSE. ATTENTION: UTILISER UN FUSIBLE DE RECHANGE DE MÊME TYPE DE_A,_V. 2.
  • Page 45 Power Supply 1/4 Schematic Diagram CAUTION ! NOTE: Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. The voltage for parts in hot circuit is measured using CAUTION ! : For continued protection against risk of fire, If Main Fuse (F601) is blown , check to see that all components in the power supply hot GND as a common terminal.
  • Page 46 Power Supply 2/4 Schematic Diagram 10-4 A91F3SCM2...
  • Page 47 Power Supply 3/4 & Jack Schematic Diagram 10-5 A91F3SCM3...
  • Page 48 Power Supply 4/4 Schematic Diagram A91F3SCM4 10-6...
  • Page 49 Inverter Schematic Diagram NOTE: The voltage for parts in hot circuit is measured using hot GND as a common terminal. A91F3SCINV 10-7...
  • Page 50 Function Schematic Diagram 10-8 A91F3SCF...
  • Page 51 IR Sensor & Junction Schematic Diagram A91F3SCIR 10-9...
  • Page 52 Digital Main 1/5 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3301. IC3301 is divided into seven and shown as IC3301 (1/5) ~ IC3301 (5/5) in this Digital Main Schematic Diagram Section. 10-10 A91F3SCD1...
  • Page 53 Digital Main 2/5 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3301. IC3301 is divided into seven and shown as IC3301 (1/5) ~ IC3301 (5/5) in this Digital Main Schematic Diagram Section. 10-11 A91F3SCD2...
  • Page 54 Digital Main 3/5 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3301. IC3301 is divided into seven and shown as IC3301 (1/5) ~ IC3301 (5/5) in this Digital Main Schematic Diagram Section. 10-12 A91F3SCD3...
  • Page 55 Digital Main 4/5 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3301. IC3301 is divided into seven and shown as IC3301 (1/5) ~ IC3301 (5/5) in this Digital Main Schematic Diagram Section. A91F3SCD4 10-13...
  • Page 56 Digital Main 5/5 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3301. IC3301 is divided into seven and shown as IC3301 (1/5) ~ IC3301 (5/5) in this Digital Main Schematic Diagram Section. A91F3SCD5 10-14...
  • Page 57 Power Supply CBA Top View Because a hot chassis ground is present in the power CAUTION ! supply circuit, an isolation transformer must be used. Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. CAUTION ! : For continued protection against risk of fire, Also, in order to have the ability to increase the input If Main Fuse (F601) is blown , check to see that all components in the power supply...
  • Page 58 Power Supply CBA Bottom View Because a hot chassis ground is present in the power supply circuit, an isolation transformer must be used. CAUTION ! : For continued protection against risk of fire, replace only with same type 4 A, 125V fuse. Also, in order to have the ability to increase the input 4A/125V slowly,when troubleshooting this type power supply...
  • Page 59 Inverter CBA Top View Because a hot chassis ground is present in the power NOTE: supply circuit, an isolation transformer must be used. The voltage for parts in hot circuit is measured using Also, in order to have the ability to increase the input hot GND as a common terminal.
  • Page 60 Inverter CBA Bottom View Because a hot chassis ground is present in the power NOTE: supply circuit, an isolation transformer must be used. The voltage for parts in hot circuit is measured using Also, in order to have the ability to increase the input hot GND as a common terminal.
  • Page 61 Junction CBA Function CBA Top View Junction CBA Bottom View Top View BA94F0F01032 Function CBA Bottom View BA94F0F01032-B 10-19...
  • Page 62 IR Sensor CBA Top View Jack CBA Top View IR Sensor CBA Bottom View Jack CBA Bottom View BA94F0F01032-C BA94F0F01022-B 10-20...

  • Page 63: Waveforms

    WAVEFORMS WF1 ~ WF7 = Waveforms to be observed at Waveform check points. (Shown in Schematic Diagram.) Input: NTSC Color Bar Signal (with 1kHz Audio Signal) Pin 4 of CN302 Pin 17 of CN302 CVBS 0.2V 20µs VIDEO-Pb 0.2V 20µs Pin 8 of CN302 Pin 19 of CN302 20µs...

  • Page 64: Wiring Diagram

    WIRING DIAGRAM 12-1 A91F3WI...

  • Page 65: Exploded Views

    EXPLODED VIEWS Cabinet [LC320SLX, 32MF339B/F7, LC320SSX] Comparison Chart of Models and Marks Model Mark [ B, C ] LC320SLX 32MF339B/F7 LC320SSX [ A ] Inverter CBA CL801 CL201 SP801 Function CBA CL101 Junction CBA CL103 IR Sensor CBA CL802 CL1003...
  • Page 66 Cabinet [LC320EMX] Inverter CBA CL801 CL201 CL802 SP801 SP802 Junction CBA CL1003 CL101 IR Sensor CBA CL701 Jack CBA LCD1 Function CBA CL103 CL3902 Stand Assembly Power Supply CBA AC601 CL3702 CL3701 See Electrical Parts List for parts with this mark. Digital Main CBA Unit 13-2 A91F4CEX...
  • Page 67 Packing [LC320SLX, 32MF339B/F7, LC320SSX] Some Ref. Numbers are not in sequence. Stand Assembly Packing Tape Tape Packing Tape Tape Packing Tape 13-3 A91F3PEX...
  • Page 68 Packing [LC320EMX] Some Ref. Numbers are not in sequence. Stand Assembly Packing Tape Tape Packing Tape Tape Packing Tape 13-4 A91F4PEX...

  • Page 69: Mechanical Parts List

    MECHANICAL PARTS LIST [ LC320SLX ] PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. CHILD SAFETY SHEET A94F1UH 1EMN24522 Before replacing any of these components, read REGISTRATION CARD (SYLVANIA) A94F1UH...
  • Page 70 MECHANICAL PARTS LIST [ 32MF339B/F7 ] PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. CHILD SAFETY SHEET A94F0UH 1EMN24439 Before replacing any of these components, read REGISTRATION CARD (MAGNAVOX) 1EMN24699 A94F0UH carefully the product safety notice in this service...
  • Page 71 MECHANICAL PARTS LIST [ LC320SSX ] PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. QUICK START GUIDE A91F1UH 1EMN24679 Before replacing any of these components, read CHILD SAFETY SHEET A94F1UH 1EMN24522 carefully the product safety notice in this service REGISTRATION CARD (SYLVANIA) A94F1UH...
  • Page 72 MECHANICAL PARTS LIST [ LC320EMX ] PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. CHILD SAFETY SHEET A94F1UH 1EMN24522 Before replacing any of these components, read REGISTRATION CARD (EMERSON) A91F4UH 1EMN24701 carefully the product safety notice in this service manual.

  • Page 73: Electrical Parts List

    ELECTRICAL PARTS LIST [ LC320SLX ] PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. C602# METALIZED FILM CAP . 0.47µF/250V CT2E474MS037 Before replacing any of these components, read C605 CAP ELECTROLYTIC 470µF/200V M...
  • Page 74 Ref. No. Description Part No. Ref. No. Description Part No. C816 ELECTROLYTIC CAP . 10µF/50V M CE1JMASDL100 D209 DIODE ZENER 39BSB-T26 NDTB039BST26 C817 CHIP CERAMIC CAP .(1608) B K 1µF/25V CHD1EK30B105 D210 DIODE ZENER 6V2BSB-T26 NDTB6R2BST26 C818 CHIP CERAMIC CAP .(1608) B K 0.1µF/25V CHD1EK30B104 D211 SWITCHING DIODE 1SS133(T-77)
  • Page 75 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES. 1/10W J 100k Ω D804 DIODE ZENER 20BSB-T26 NDTB020BST26 R201 RRXAJR5Z0104 CHIP RES. 1/10W J 1k Ω D806 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 R202 RRXAJR5Z0102 RES CARBON FILM T 1/4W J 560 Ω R204 RCX4561T1001 CHIP RES.
  • Page 76 Ref. No. Description Part No. Ref. No. Description Part No. RES CARBON FILM T 1/4W J 1.2k Ω CHIP RES. 1/10W J 75 Ω R613 RCX4122T1001 R732 RRXAJR5Z0750 METAL OXIDE FILM RES. 2W J 0.39 Ω CHIP RES. 1/10W J 75 Ω R614# RN02R39ZU001 R733...
  • Page 77 INVERTER ASSEMBLY Ref. No. Description Part No. AC601# AC CORD W/O A GND WIRE UL/CSA 1770 NO WAC0172LW022 Ref. No. Description Part No. BLACK POW HEAT SINK A7120UH 1EM423993 INVERTER ASSEMBLY 1ESA19751 Consists of the following: MODULE HEAT SINK PMC P7150UT 1EM423968 INVERTER CBA ----------...
  • Page 78 Ref. No. Description Part No. Ref. No. Description Part No. C1216 CAP CERAMIC (AX) 1500pF/50V/B/K CA1J152TU061 D1112 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 C1217 ELECTROLYTIC CAP . 10µF/50V M CE1JMASDL100 D1113 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 C1218 CHIP CERAMIC CAP .(1608) B K 0.01µF/50V CHD1JK30B103 D1114 SWITCHING DIODE 1SS133(T-77)
  • Page 79 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES. 1/10W F 3.3k Ω R1023 RRXAFR5H3301 CHIP RES. 1/10W F 100k Ω R1024 RRXAFR5H1003 IC1000 IC PULSE-WIDTH-MODULATION CONT NSCA0T0TY006 TL494CDR CHIP RES. 1/10W F 220 Ω R1026 RRXAFR5H2200 IC1700 IC BA10324AF-E2 QSZBA0TRM032...
  • Page 80 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES. 1/10W J 20k Ω RES CARBON FILM T 1/4W J 3.9k Ω R1217 RRXAJR5Z0203 R1971 RCX4392T1001 CHIP RES. 1/10W J 390 Ω CHIP RES. 1/10W J 68k Ω R1218 RRXAJR5Z0391 R1972...
  • Page 81 Ref. No. Description Part No. DIODES D104 LED GREEN 333GT/E(FNA) NPWZ33GTEFNA D105 LED L-53HT NP4Z000L53HT RESISTORS RES CARBON FILM T 1/4W J 220 Ω R123 RCX4221T1001 RES CARBON FILM T 1/4W J 220 Ω R124 RCX4221T1001 CHIP RES. 1/10W J 1k Ω R126 RRXAJR5Z0102 RES CARBON FILM T 1/4W J 3.3k Ω...
  • Page 82 ELECTRICAL PARTS LIST [ 32MF339B/F7 ] PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. C602# CAP METALLIZED FILM 0.47µF/300V K 3.5MM CT2F474DC004 Before replacing any of these components, read C605 CAP ELECTROLYTIC 470µF/200V M CA2D471DYG07...
  • Page 83 Ref. No. Description Part No. Ref. No. Description Part No. C816 ELECTROLYTIC CAP . 10µF/50V M CE1JMASDL100 D209 DIODE ZENER 39BSB-T26 NDTB039BST26 C817 CHIP CERAMIC CAP .(1608) B K 1µF/25V CHD1EK30B105 D210 DIODE ZENER 6V2BSB-T26 NDTB6R2BST26 C818 CHIP CERAMIC CAP .(1608) B K 0.1µF/25V CHD1EK30B104 D211 SWITCHING DIODE 1SS133(T-77)
  • Page 84 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES. 1/10W J 1k Ω D806 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 R202 RRXAJR5Z0102 RES CARBON FILM T 1/4W J 560 Ω R204 RCX4561T1001 CHIP RES. 1/10W J 1k Ω R206 RRXAJR5Z0102 IC201 IC TL3472CDR...
  • Page 85 Ref. No. Description Part No. Ref. No. Description Part No. METAL OXIDE FILM RES. 2W J 0.39 Ω CHIP RES. 1/10W J 75 Ω R614# RN02R39ZU001 R732 RRXAJR5Z0750 RES CARBON FILM T 1/4W J 3.9k Ω CHIP RES. 1/10W J 75 Ω R615 RCX4392T1001 R733...
  • Page 86 INVERTER ASSEMBLY Ref. No. Description Part No. AC601# AC CORD W/O A GND WIRE UL/CSA 1770 NO WAC0172LW022 Ref. No. Description Part No. BLACK POW HEAT SINK A7120UH 1EM423993 INVERTER ASSEMBLY 1ESA19751 Consists of the following: MODULE HEAT SINK PMC P7150UT 1EM423968 INVERTER CBA ----------...
  • Page 87 Ref. No. Description Part No. Ref. No. Description Part No. C1216 CAP CERAMIC (AX) 1500pF/50V/B/K CA1J152TU061 D1112 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 C1217 ELECTROLYTIC CAP . 10µF/50V M CE1JMASDL100 D1113 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 C1218 CHIP CERAMIC CAP .(1608) B K 0.01µF/50V CHD1JK30B103 D1114 SWITCHING DIODE 1SS133(T-77)
  • Page 88 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES. 1/10W F 3.3k Ω R1023 RRXAFR5H3301 CHIP RES. 1/10W F 100k Ω R1024 RRXAFR5H1003 IC1000 IC PULSE-WIDTH-MODULATION CONT NSCA0T0TY006 TL494CDR CHIP RES. 1/10W F 220 Ω R1026 RRXAFR5H2200 IC1700 IC BA10324AF-E2 QSZBA0TRM032...
  • Page 89 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES. 1/10W J 20k Ω RES CARBON FILM T 1/4W J 3.9k Ω R1217 RRXAJR5Z0203 R1971 RCX4392T1001 CHIP RES. 1/10W J 390 Ω CHIP RES. 1/10W J 68k Ω R1218 RRXAJR5Z0391 R1972...
  • Page 90 Ref. No. Description Part No. DIODES D104 LED GREEN 333GT/E(FNA) NPWZ33GTEFNA D105 LED L-53HT NP4Z000L53HT RESISTORS RES CARBON FILM T 1/4W J 220 Ω R123 RCX4221T1001 RES CARBON FILM T 1/4W J 220 Ω R124 RCX4221T1001 CHIP RES. 1/10W J 1k Ω R126 RRXAJR5Z0102 RES CARBON FILM T 1/4W J 3.3k Ω...
  • Page 91 ELECTRICAL PARTS LIST [ LC320SSX ] PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. C602# CAP METALIZED FILM 0.47µF/300V K 3.5MM CT2F474DC004 Before replacing any of these components, read C605 CAP ELECTROLYTIC 470µF/200V M CA2D471DYG07...
  • Page 92 Ref. No. Description Part No. Ref. No. Description Part No. C816 ELECTROLYTIC CAP . 10µF/50V M CE1JMASDL100 D209 DIODE ZENER 39BSB-T26 NDTB039BST26 C817 CHIP CERAMIC CAP .(1608) B K 1µF/25V CHD1EK30B105 D210 DIODE ZENER 6V2BSB-T26 NDTB6R2BST26 C818 CHIP CERAMIC CAP .(1608) B K 0.1µF/25V CHD1EK30B104 D211 SWITCHING DIODE 1SS133(T-77)
  • Page 93 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES. 1/10W J 1k Ω D806 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 R202 RRXAJR5Z0102 RES CARBON FILM T 1/4W J 560 Ω R204 RCX4561T1001 CHIP RES. 1/10W J 1k Ω R206 RRXAJR5Z0102 IC201 IC TL3472CDR...
  • Page 94 Ref. No. Description Part No. Ref. No. Description Part No. METAL OXIDE FILM RES. 2W J 0.39 Ω CHIP RES. 1/10W J 75 Ω R614# RN02R39ZU001 R732 RRXAJR5Z0750 RES CARBON FILM T 1/4W J 3.9k Ω CHIP RES. 1/10W J 75 Ω R615 RCX4392T1001 R733...
  • Page 95 INVERTER ASSEMBLY Ref. No. Description Part No. AC601# AC CORD W/O A GND WIRE UL/CSA 1770 NO WAC0172LW022 Ref. No. Description Part No. BLACK POW HEAT SINK A7120UH 1EM423993 INVERTER ASSEMBLY 1ESA19751 Consists of the following: MODULE HEAT SINK PMC P7150UT 1EM423968 INVERTER CBA ----------...
  • Page 96 Ref. No. Description Part No. Ref. No. Description Part No. C1216 CAP CERAMIC (AX) 1500pF/50V/B/K CA1J152TU061 D1112 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 C1217 ELECTROLYTIC CAP . 10µF/50V M CE1JMASDL100 D1113 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 C1218 CHIP CERAMIC CAP .(1608) B K 0.01µF/50V CHD1JK30B103 D1114 SWITCHING DIODE 1SS133(T-77)
  • Page 97 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES. 1/10W F 3.3k Ω R1023 RRXAFR5H3301 CHIP RES. 1/10W F 100k Ω R1024 RRXAFR5H1003 IC1000 IC PULSE-WIDTH-MODULATION CONT NSCA0T0TY006 TL494CDR CHIP RES. 1/10W F 220 Ω R1026 RRXAFR5H2200 IC1700 IC BA10324AF-E2 QSZBA0TRM032...
  • Page 98 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES. 1/10W J 20k Ω RES CARBON FILM T 1/4W J 3.9k Ω R1217 RRXAJR5Z0203 R1971 RCX4392T1001 CHIP RES. 1/10W J 390 Ω CHIP RES. 1/10W J 68k Ω R1218 RRXAJR5Z0391 R1972...
  • Page 99 Ref. No. Description Part No. DIODES D104 LED GREEN 333GT/E(FNA) NPWZ33GTEFNA D105 LED L-53HT NP4Z000L53HT RESISTORS RES CARBON FILM T 1/4W J 220 Ω R123 RCX4221T1001 RES CARBON FILM T 1/4W J 220 Ω R124 RCX4221T1001 CHIP RES. 1/10W J 1k Ω R126 RRXAJR5Z0102 RES CARBON FILM T 1/4W J 3.3k Ω...
  • Page 100 ELECTRICAL PARTS LIST [ LC320EMX ] PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. C602# CAP METALLIZED FILM 0.47µF/300V K 3.5MM CT2F474DC004 Before replacing any of these components, read C605 CAP ELECTROLYTIC 470µF/200V M CA2D471DYG07...
  • Page 101 Ref. No. Description Part No. Ref. No. Description Part No. C816 ELECTROLYTIC CAP . 10µF/50V M CE1JMASDL100 D209 DIODE ZENER 39BSB-T26 NDTB039BST26 C817 CHIP CERAMIC CAP .(1608) B K 1µF/25V CHD1EK30B105 D210 DIODE ZENER 6V2BSB-T26 NDTB6R2BST26 C818 CHIP CERAMIC CAP .(1608) B K 0.1µF/25V CHD1EK30B104 D211 SWITCHING DIODE 1SS133(T-77)
  • Page 102 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES. 1/10W J 1k Ω D806 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 R202 RRXAJR5Z0102 RES CARBON FILM T 1/4W J 560 Ω R204 RCX4561T1001 CHIP RES. 1/10W J 1k Ω R206 RRXAJR5Z0102 IC201 IC TL3472CDR...
  • Page 103 Ref. No. Description Part No. Ref. No. Description Part No. METAL OXIDE FILM RES. 2W J 0.39 Ω CHIP RES. 1/10W J 75 Ω R614# RN02R39ZU001 R732 RRXAJR5Z0750 RES CARBON FILM T 1/4W J 3.9k Ω CHIP RES. 1/10W J 75 Ω R615 RCX4392T1001 R733...
  • Page 104 INVERTER ASSEMBLY Ref. No. Description Part No. AC601# AC CORD W/O A GND WIRE UL/CSA 1770 NO WAC0172LW022 Ref. No. Description Part No. BLACK POW HEAT SINK A7120UH 1EM423993 INVERTER ASSEMBLY 1ESA20146 Consists of the following: MODULE HEAT SINK PMC P7150UT 1EM423968 INVERTER CBA ----------...
  • Page 105 Ref. No. Description Part No. Ref. No. Description Part No. C1216 CAP CERAMIC (AX) 1500pF/50V/B/K CA1J152TU061 D1112 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 C1217 ELECTROLYTIC CAP . 10µF/50V M CE1JMASDL100 D1113 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 C1218 CHIP CERAMIC CAP .(1608) B K 0.01µF/50V CHD1JK30B103 D1114 SWITCHING DIODE 1SS133(T-77)
  • Page 106 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES. 1/10W F 3.3k Ω R1023 RRXAFR5H3301 CHIP RES. 1/10W F 100k Ω R1024 RRXAFR5H1003 IC1000 IC PULSE-WIDTH-MODULATION CONT NSCA0T0TY006 TL494CDR CHIP RES. 1/10W F 220 Ω R1026 RRXAFR5H2200 IC1700 IC BA10324AF-E2 QSZBA0TRM032...
  • Page 107 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES. 1/10W J 20k Ω RES CARBON FILM T 1/4W J 3.9k Ω R1217 RRXAJR5Z0203 R1971 RCX4392T1001 CHIP RES. 1/10W J 390 Ω CHIP RES. 1/10W J 68k Ω R1218 RRXAJR5Z0391 R1972...
  • Page 108 IR SENSOR CBA Ref. No. Description Part No. IR SENSOR CBA ---------- Consists of the following: CAPACITORS C113 ELECTROLYTIC CAP . 47µF/16V M H7 CE1CMAVSL470 C115 CHIP CERAMIC CAP . CH J 330pF/50V CHD1JJ3CH331 DIODES D104 LED GREEN 333GT/E(FNA) NPWZ33GTEFNA D105 LED L-53HT NP4Z000L53HT...

This manual is also suitable for:

Lc320ssx32mf339b/f7Lc320emx

Table of Contents