Wyse WY-60 User Manual page 53

Commands Supported in
ASCII Personalities
Table D-2 lists all the ASCII commands recognized by the terminal. The native
mode code for the command is given in the second column. The remaining
columns show the support for the command in other ASCII personalities
according to the following notations:
Same
Same as native code (code is native to other terminal also)
Wyse
Same as native code (Wyse enhancement-
ENH
Same as native code when enhance mode is on (Wyse enhancement-
native to other terminal)
-code not native to other terminal)
-code not
A code listed under a nonnative personality indicates that the related terminal's
native code is supported. A blank in any column indicates that the command is
not supported.
Variables are shown in italics. Their values are given at the end of the table
according to the reference numbers in brackets after the command description,
e.g., [22].