Wyse WY-60 User Manual page 13

Parameter Explanation
FKEY XMT LIMIT The terminal sends function key definitions
NONE As fast as the baud rate allows
60CPS
At a maximum rate of 60 characters per second
150CPS
At a maximum rate of 150 characters per second
KEY REPEAT When held down for more than half a second, the keys
ON Repeat
OFF Don't repeat
KEYCLICK
Each time a key is pressed or repeated,
ON A muted beep sounds
OFF
No beep sounds
KEYLOCK
When CAPS LOCK is engaged,
CAPS Alphabetic keys generate only uppercase characters
REV
The action of S H I F T is reversed—shifted alphabetic
keys generate lowercase characters, unshifted keys
generate uppercase characters
LANGUAGE
Choose the setting that matches your keyboard
language.
MARGIN BELL The terminal's margin bell
OFF Doesn't ring
ON Rings when the cursor reaches the column where
margin bell is set (default is column 72 in 80-column
mode, column 124 in 132-column mode)
RETURN R E T U R N sends the ASCII character for
CR Carriage return (CR)
CRLF Carriage return (CR) and linefeed (LF)
TAB Horizontal tab (HT)
WYSEWORD When Wyseword mode is
OFF Off, keys send standard key codes
ON
On, specified keys send WordStar-compatible codes
XMT LIMIT The terminal sends data through the data port
NONE As fast as the baud rate allows
60CPS At a maximum rate of 60 characters per second
150CPS At a maximum rate of 150 characters per second