Wyse WY-60 User Manual page 15

Parameter Explanation
BAUD RATE The MODEM port baud rate is
9600
19200
38400
50
75
110
134.5
150
300
600
1200
1800
2000
2400
4800
DATA/STOP BITS Through the MODEM port, the terminal sends
and receives
8/1 8-bit data with one stop bit
7/2 7-bit data with two stop bits
8/2 8-bit data with two stop bits
7/1 7-bit data with one stop bit
PARITY 3 The terminal sends data to the MODEM port
with
NONE No parity bit
ODD Odd parity
MARK A high (mark) parity bit
EVEN Even parity
RCV HNDSHAKE The terminal controls receipt of data from a
device connected to the MODEM port by
NONE No handshaking protocol
XON/XOFF X-on/X-off handshaking
DTR DTR handshaking (raising and lowering the
DTR line voltage)
BOTH Both X-on/X-off and DTR handshaking
signals
3 The terminal ignores any incoming parity
bits.