Method B:
When you don't know the preset number of the
desired station.
1 Press TUNING/PRESET
to make the PRESET
indicator
appear.
2 Find the desired station by turning the TUNING
knob
control toward » for higher numbered stations or < for
lower numbered stations.
1-2-5. Scanning Stored Stations Automatically
Press TUNE MODE to make "AUTO" appear and turn the
TUNING knob.
If scanning does not start
Scanning starts only when you turn the TUNING knob while
the code indicator is flashing.
If the flashing has stopped,
press TUNE MODE again.
1-2-6. Scanning Stored Stations Manually
1. Press TUNING/PRESET
to make the PRESET indicator
appear.
2. Press TUNE MODE.
AUTO indicator goes off.
3. Turn TUNING/CHARACTER,
until desired station is re-
ceived.
| ST-S770ES