Download Print this page

Advertisement

Quick Links

1-800-850-5914
PHOENIX, AZ USA
Approved for
SHARP LEADING EDGE
3rd party certified by an ISO 17025 accredited test
laboratory. Lengths up to 110'.
Should be used as part of an employee training program as
required by OSHA and is intended to meet the manufacturers
instructions as required by ANSI Z359.14-2014 CLASS B (SLE).
WARNING!
This product is part of a personal fall arrest system.The user must
read and follow the manufacturers instructions for each
component of the system.These instructions must be provided to
the user of this product.The user must read and understand these
instructions before using this product. Manufacturers instructions
must be followed for proper use and maintenance of this product.
Alteration or misuse of this product, or failure to follow
instructions may result in serious injury or death.
ANCHORAGE: The anchorage to which this product is attached
must be capable of sustaining a static load in the direction
applied by the personal fall arrest system of at least 3600 Ibs.
with certification of a qualified person, or 5000 Ibs. without
certification. When more than one personal fall arrest system
is attached to the same structure, the strength requirements
stated above must be multiplied by the number of personal
arrest systems attached to the structure.
PLAN: Your personal fall protection system before installing
and using this equipment. Consider all factors affecting your
safety during use of this equipment.
CAUTION: BEWARE OF PENDULUM SWINGSTO AVOID STRIKING AN
OBJECT OR CONTACT WITH A LOWER LEVEL, FAILURE TO FOLLOW
INSTRUCTIONS MAY RESULT IN SERIOUS INJURY.
FREE FALL: Ensure adequate clearance exists in your fall path
to prevent striking an object. When the safety retractable is
anchored above, a minimum of 4 ft. from the working level to
the lower level or nearest obstruction is recommended, if
anchored at foot level an additional 9 ft. clearance is needed.
Working load up to 300 lbs ANSI or 400 lbs OSHA. If worker is
over 300 lbs add 12" to safety factor to avoid lower level
contact. Avoid working where your lifeline may cross or tangle
with that of another worker. Do not allow the lifeline to pass
under your arms or between your feet. Never clip, knot, or
otherwise prevent the lifeline from retracting.
WIDEST SHARP LEADING EDGE APPROVED PRODUCT LINE IN THE INDUSTRY!
1, 2, 8, 17, 26, 27, 28, 29 & 31
and foot level drops.
ON ULTRASAFEUSA.COM
USER INSTRUCTION MANUAL
DESCRIPTION: SAFETY RETRACTABLE LANYARDS MADE WITH WIRE
ROPE / WEBBING. ALSO AVAILABLE 100%TIE-OFF
MODEL: M2-HPSY8Y, M2-HPSY8YCA, M2-HPSY8YABB, M2-HPSY8YCT,
US-HN8, MM-HNY8Y, MM-HNY8YCAS, US-HPS8, US-HPS11, US-HPS20,
US-HPS30, US-HPS40, US-HN10, US-HN15, US-HN20, US-HN30,
US-HN40, US-HN60, US-HN80, US-H110, US-H150, US-H210
MEETS OSHA & ANSI Z359.14 CLASS B (SLE)
WATCH VIDEOS
PROUDLY
MANUFACTURED IN
GERMANY
RELIABILITY YOU
CAN COUNT ON!
FOR EXTRA
COMFORT
313RL1S

Advertisement

loading
Need help?

Need help?

Do you have a question about the MM-HNY8Y and is the answer not in the manual?

Questions and answers

Summary of Contents for Ultra-safe MM-HNY8Y

  • Page 1 DESCRIPTION: SAFETY RETRACTABLE LANYARDS MADE WITH WIRE ROPE / WEBBING. ALSO AVAILABLE 100%TIE-OFF MODEL: M2-HPSY8Y, M2-HPSY8YCA, M2-HPSY8YABB, M2-HPSY8YCT, US-HN8, MM-HNY8Y, MM-HNY8YCAS, US-HPS8, US-HPS11, US-HPS20, US-HPS30, US-HPS40, US-HN10, US-HN15, US-HN20, US-HN30, US-HN40, US-HN60, US-HN80, US-H110, US-H150, US-H210 MEETS OSHA & ANSI Z359.14 CLASS B (SLE)
  • Page 2: Before Each Use

    NOTE: Large throat opening snap hooks an authorized service station for repair, do not ULTRA-SAFE equipment is designed for use should not be connected to standard size D- re-stitch or repair.. with only ULTRA-SAFE approved components Rings or similar objects which will result in a and ULTRA-SAFE sub systems.
  • Page 3 Requirements corresponding to the new or Email Us At ANSI.Z359.14-2014 Class B (SLE) (up to 110’). info@ultrasafeusa.com To put things simply: Ultra-Safe retractables meet this standard! List of the requirements: Diagram showing a dynamic test procedure • Design and ergonomics Quick Release •...
  • Page 4 Also includes new improved swivel yoke for extra comfort. Light weight... lightest on the market. Meets ANSI 2359.14-2014 Sharp Leading Edge Class (SLE). NOTE: MM-HNY8Y, M2-HPSY8Y units, US-HN8, US-HPS8, US-HPS11, US-HN10, and US-HN15 max arrest force 900lbs. These only have a 24” pullout, but are all (SLE).
  • Page 5 NEW! YOKE SWIVEL TOP for RETRACTABLE Y-LANYARDS...
  • Page 6 Wire RetractableY-Lanyards withYokeTop and Swivel and large aluminum swivel hooks. Meets ANSI 2359.14-2014 Sharp Leading Edge Class (SLE). NOTE: MM-HNY8Y, M2-HPSY8Y units, US-HN8, US-HPS8, US-HPS11, US-HN10, and US-HN15 max arrest force 900lbs. These only have a 24” pullout, but are all (SLE).
  • Page 7 Personnel and Material winch 660 lbs. SWL Length 100’ **Meets ANSI 2359.14-2014 Sharp Leading Edge Class (SLE). NOTE: MM-HNY8Y, M2-HPSY8Y units, US-HN8, US-HPS8, US-HPS11, US-HN10, and US-HN15 max arrest force 900lbs. These only have a 24” pullout, but are all (SLE). Great for lower level contact issues.
  • Page 8 MODEL: M2-HPSY8Y, M2-HPSY8YCA, M2-HPSY8YCT, M2-HPSY8YABB DESCRIPTION: 100%TIE-OFF SAFETY RETRACTABLE LANYARD ASSEMBLY FOR HOT WORK MATERIAL: Housing: aluminum Drum: nylon/aluminum Internal components: steel/aluminum Lifeline: 3/4” Dyneema Internal shock absorbing mechanism: disk brake ARREST DISTANCE: 24” Max FRONT BACK UNIT WORN PROPERLY UNIT WORN PROPERLY UNIT WORN PROPERLY UNIT WORN PROPERLY...
  • Page 9: Safety Information

    INSTRUCTIONS FOR USE SAFETY INFORMATION 1. Fall arresters according to EN 360:2002, CSA hooks) have to be screwed together using the Z259.2.2, ANSI/ASSE Z359.1-2007, Z359.14-2014 retention nut constitute personal protective equipment (PPE) for 7. After attaching the fall arrester to a suitable anchor the purposes of protection against falls.
  • Page 10 INSTRUCTIONS FOR USE SAFETY INFORMATION 17. The max. working load of the person to be secured The service life of the fall arrester has to be is 300 lbs ANSI or 400 lbs OSHA determined during each annual inspection; 18. Fall arresters have to be protected against the depending on wear, it is approx.
  • Page 11 Lengths up to 110’. Meets OSHA & ANSI Z359.14-2014 Class B (SLE). Note: All Ultra-Safe Retractables (web and wire) are approved for below foot level drops such as catenary lines and sharp leading edge work up to 78” free fall.
  • Page 12 INSPECTION AND MAINTENANCE LOG Serial Number: Model Number: Date Purchased: Date of First Use: Inspection Date Inspection Items Noted Corrective Action Maintenance Performed Approved By: Approved By: Approved By: Approved By: Approved By: Approved By: Approved By: Approved By: Approved By: Approved By: Approved By: Approved By:...