Sony STR-DG710 Operating Instructions Manual page 67

Switching between
digital andanalogaudio
(INPUT MODE)
When you connect components to both digital
and analog audio input jacks (SAT) on the
receiver, you can fix the audio input mode.
1
Turn INPUT SELECTOR on the
receiver to select the input.
You can also use tile input buttons on tile
remote.
2
Press INPUT MODE repeatedly
on the receiver to select the
audio input mode.
Tile selected audio input mode appears on
the display.
Audio input modes
• AUTO IN
Gives priority to digital audio signals when
there are both digital and analog
connections. If there are no digital audio
signals, analog audio signals are selected.
• HDMI IN
Specifies the digital audio signals input to
the HDMI jack.
• COAX IN
Specifies the digital audio signals input to
the DIGITAL COAXIAL jack.
• OPT IN
Specifies the digital audio signals input to
the DIGITAL OPTICAL jack.
• ANALOG
Specifies the analog audio signals input to
the AUDIO IN (L/R)jacks.
Notes
• Some audio input modes may not be set up
depending on the input.
• When the ANALOG DIRECT function is being
used. the audio input mode is set to ';ANALOG"
automatically. You cannot select other modes.
o
O
"O
-I
67us