Loading Door Lock - Beko B3WFU58415W User Manual

4.3.11 Loading door lock

There is a locking system on the loading door of the machine that prevents opening of the loading door in
cases when the water level is unsuitable.
"Door Locked" symbol appears on the display when the loading door is locked.
C
If the Remote Control Function is selected, the door will be locked. In order to open the door you must deactivate Remote
Start Function by either pressing the Remote Start button or changing the programme position.
Opening the loading door in case of power failure:
C
In case of a power failure, you can use the loading door emergency handle under the pump filter lid to manually open the
loading door.
A
WARNING:
may be hot and could cause scalding.
4.3.12 Changing the selections after programme has started
Adding laundry after the programme has started
If the water level in the machine is suitable when you press Start/Pause button, the door lock will be
deactivated and the door will open, allowing you to add garments. The door lock icon on the display goes off
when the door lock is deactivated. After adding garments, close the door and press Start/Pause button once
again to resume the washing cycle.
If the water level in the machine is not suitable when you press Start/Pause button, the door lock
cannot be deactivated and the door lock icon on the display remains on.
26 / EN
Before opening the loading door, make sure that there is no water in the machine to avoid flooding. Water
• Turn off and unplug the appliance.
• Open the pump filter lid.
• Pull and release the loading door emergency handle with
a tool. Then, open the loading door.
• Repeat the previous step if the loading door does not
open.
:
Washing Machine / User's Manual