Table of Contents
Advertisement
FEATURES & OPERATIONS
Rear door-Power Liftgate
Instrument panel
Power Liftgate (back door)
(open only)
Hands-Free, Foot-Activated Power Liftgate
(if equipped)
To automatically open/close Power Liftgate Quickly swipe your foot near the
lower center part of the rear bumper for within 1 second to trigger sensor. To
operate, make sure that the touchless sensor operation is enabled, the power
switch is OFF and that you are carrying the remote.
NOTE:
- Installation of a tow hitch receiver or other accessories may require disabling
or removing the kick sensor.
- If battery is disconnected, the power back door needs to be reinitialized.
PROGRAMMABLE POWER LIFTGATE
1. When the liftgate reaches the desired height, push the rear liftgate close-button
(on the door jam of the liftgate) once. Press and hold the button until the buzzer
sounds (4 times).
2. To reset the height, with the liftgate open and not moving, press and hold the
rear liftgate close-button until the buzzer sounds 4 times, and continue to hold
until it buzzes again, then let go. Push the same button to close the liftgate. When
you next open the liftgate, it will open to the maximum height.
3. To set the height using the Multi-Information Display, press " " or " " of the
meter control switches and select "
select "
(PBD)" and then press "
press "
." Select desired position (5 height options to choose from,) then press
"
."
For more details, refer to the Owner's Manual.
(if equipped)
(close only)
" from "
" screen. Press " " or " " and
." Select "Opening Adjustment," then
18
Open: Push and hold
Close: Push and hold again
Carry Smart
Key remote
Sensor area
Advertisement
Table of Contents
