Toyota RAV4 2021 Quick Reference Manual page 43

CHANGING PRE-COLLISION ALERT TIMING
(1) Press " " switches and select "
(2) Press " " switches and select "
screen is displayed.
(3) Press " " switches and select "Sensitivity" and then press "
desired setting. Each time it is pressed, the response to the PCS alert timing
changes as shown above.
(4) Press " " to go back to the menu.
Note: PCS is enabled each time the vehicle is turned on. The system can be
disabled/enabled and the alert timing of the system can be changed. (Alert
timing only, brake operation remains the same.)
DISABLING PRE-COLLISION SYSTEM (PCS)
(1) Press " " switches and select "
(2) Press " " switches and select "
screen is displayed.
(3) Press " " and select "PCS on/off" and then press "
setting.
(4) Press " " to go back to the menu.
Note: The system is enabled each time the vehicle is turned on.
Refer to the Toyota Owner's Manual for additional information on PCS operation,
settings adjustments, limitations, and precautions before attempting to use it.
Middle
Far
(default)
" from the Multi-Information Display (MID).
PCS" and then press "
" from the Multi-Information Display (MID).
PCS" and then press "
41
Near
." The setting
" to select the
." The setting
" to select the desired