Electrical Warnings - Bonnet Neve SHAPE User Instructions

Modello - Modèle - Model
Modell - Modelo - Modelo
Fabbricante - Constructeur - Manufacturer
Hersteller - Fabricante - Fabricante
User manual
2.3

Electrical warnings

IT
F
Ensure
FR
corresponds to the rating plate of the
cabinet.
EN EN
F The electrical installation must be
DE
carried out in a competent manner by
specialised technicians.
ES
F
The removal of the cover of the electrical
PT
panel
technicians.
F In compliance with the installation
rules, the power supply must include an
omnipolar disconnection device, which
ensures complete disconnection from
the network in overvoltage category III
conditions.
F The cabinet must be installed following
the instructions of the manufacturer, by
professionally qualified staff and in
compliance with the rules on electrical
systems in force in individual Countries.
F A wrong cabinet installation can cause
damage to people, animals or property,
for which the manufacturer cannot be
held liable.
F If the power cord is damaged, it must be
replaced
personnel. Do not attempt to repair the
cable.
F Do not power the cable if it is damaged.
If in doubt, contact the after-sales
service or your dealer.
N°DOC. UM000303 REV. "J" - 09/01/24
that the power
is reserved for
by authorized
SHAPE - SHAPE SV
Epta Spa - Via Mecenate, 86 - 20138 Milano (MI) ITALIA
Tel. 02/55403211 Telefax 02/55401023
2.4
A
voltage It is forbidden to use devices in addition
to those provided in the cabinet by the
manufacturer
defrosting process.
A
It is forbidden for unskilled staff to
remove the cover of the electrical panel
or open panels that require the use of
tools.
specialist
A
It is forbidden to use the cabinet for the
preservation
explosive,
substances,
containing a flammable propellant.
A It is forbidden to use the cabinet for the
preservation
pharmaceutical products.
A In case of PRODUCTS NOT PACKAGED
OR PRESERVED AT LOW TEMPERATURE,
it is prohibited to use the cabinet for the
preservation and/or display of bottles
and packages in glass.
A
It is forbidden to place the cabinet in
areas with the presence of explosive
gaseous substances.
A It
service identification plate from the cabinet.
A It is forbidden to get on the counter or
on the counter bumper.
A It is forbidden to replace components
and/or make changes to the cabinet
outside
specifications, replace original parts
with others that are not approved by
the manufacturer, under penalty of
forfeiture of the warranty.
Prohibitions
to accelerate
and/or
flammable
such as
and/or
is forbidden to
the
6/29
the
display of
or corrosive
spray cans
display of
remove the
manufacturer's